Masterpage:Right-Full-NoTitle0
EN 49
Filename [HRS6850EU4.fm]
Page 49 April 16, 2001 4:29 pm
* The default setting is bold in the table below.
8POWER SAVE
ON
OFF
When this function is set to “ON”, you can reduce the
power consumption while the recorder is turned off.
NOTES:
●During Power Save mode ...
... the front display panel will be turned off.
... the Just Clock function (墌pg. 58) does not work.
... the picture may be distorted momentarily when you turn on/
off the recorder.
●Power Save does not work when ...
... the recorder is in the Timer mode.
... the recorder’s power is turned off after timer-recording or
Instant Timer Recording.
... the Automatic Satellite Programme Recording mode is
engaged (墌pg. 33).
... “L-2 SELECT” is set to “DECODER” or “SAT” (墌pg.41).
8VIDEO STABILIZER
ON
OFF
When this function is set to “ON”, you can automatically
correct vertical vibration in the picture when playing back
unstable recordings made on another recorder.
NOTES:
●When you finish viewing a tape, be sure to set this function to
“OFF”.
●Regardless of the setting, this function has no effect during
recording and during special effects playback.
●The on-screen display may jitter vertically when this function is
set to “ON”.
●To watch recordings with close-caption, set this function to
“OFF”.
HRS6850EU4.fm Page 49 Monday, April 16, 2001 4:29 PM