Scan system, Lines VHS, Lines S-VHS | JVC HR-S6851EU, HR-S6850EU

SPECIFICATIONS

EN 65

GENERAL

Power requirement : AC 220 V – 240 Vd, 50 Hz/60 Hz Power consumption

Power on	: 22 W
Power off	: 3.8 W
Temperature
Operating	: 5°C to 40°C
Storage	: –20°C to 60°C
Operating position	: Horizontal only
Dimensions (WxHxD)
	: 400 mm x 94 mm x 278 mm
Weight	: 3.6 kg
Format	: S-VHS/VHS PAL standard
Maximum recording time
(SP)	: 240 min. with E-240 video cassette
(LP)	: 480 min. with E-240 video cassette
(EP)	: 720 min. with E-240 video cassette

VIDEO/AUDIO

Signal system	: PAL-type colour signal and CCIR
	monochrome signal, 625 lines
	50 fields
Recording system	: DA4 (Double Azimuth) head helical
	scan system

Signal-to-noise ratio: 45 dB

Horizontal resolution

(SP/LP)	: 250 lines (VHS)
	400 lines (S-VHS)
(EP)	: 220 lines (VHS)
	350 lines (S-VHS)
Frequency range	: 70 Hz to 10,000 Hz (Normal audio)
	20 Hz to 20,000 Hz (Hi-Fi audio)
Input/Output	: 21-pin SCART connectors:
	IN/OUT x 1, IN/DECODER x 1
	RCA connectors:
	VIDEO IN x 1, AUDIO IN x 1,
	AUDIO OUT x 1
	S-Video connector:
	IN x 1

TUNER/TIMER

TV channel storage capacity

	: 99 positions (+AUX position)
Tuning system	: Frequency synthesized tuner
Channel coverage	: VHF 47 MHz – 89 MHz/
	104 MHz – 300 MHz/
	302 MHz – 470 MHz
	UHF 470 MHz – 862 MHz
Aerial output	: UHF channels 22 – 69 (Adjustable)

Memory backup time

: Approx. 10 min.

ACCESSORIES

Provided accessories

:RF cable,

Infrared remote control unit, “R6” battery x 2

Specifications shown are for SP mode unless otherwise specified. E.& O.E. Design and specifications subject to change without notice.

Image 65

JVC HR-S6851EU Scan system, Signal-to-noise ratio 45 dB Horizontal resolution, Lines VHS, Lines S-VHS, Frequency range

Contents

Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector cover Rear View Front Display Panel ON-SCREEN Display Operating JVC TVs How To Use Situate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mains 10 EN Auto Set UpTurn on the recorder Select your country Select the language Perform Auto Set UpPress rt to select your language code Press rt to select Auto and press OK or e 12 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or e Just Clock Language for the on-screen display Access the Country Set screen Access the Main Menu screenLanguage 14 EN Situate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections 16 EN Setting satellite receivers brand and channel VCR Auto Standby Direct Rec TV Auto Power OnNexTView Link 18 EN Basic Playback High-Speed Turbo Search Slow MotionPause during playback Activate frame-by-frame playback Variable Speed Search 20 ENIndex Search Skip Search Repeat Playback Next Function MemoryManual Tracking Soundtrack Selection 22 EN Tape Remaining Time Instant Timer Recording ITR 24 EN Engage the S-VHS ET modeSuper VHS ET S-VHS ET Receiving Stereo and Bilingual Programmes Recording Playback Access the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 26 EN Access the Title Edit screen Set the VPS/PDC modeEngage the recorder’s timer mode Enter the programme title 28 EN Express Timer Programming VPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+ Before performing the 24 Hour Express Timer Programming Enter the programme mode30 EN Set the programme start/stop time and channel Disengage the timer mode Cancel or change a programmeReturn to the timer mode Access the Programme Check screen/display Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screen Recording mode Select the L-2 Select modeProgramme Recording Before performing the following steps 34 EN Navigation Programme Navigation Screen Navigation PlaybackLoad a recorded cassette Select a programme Select the programme 36 ENEdit Programme Title Delete Tape Data Entering CharacterDelete the tape data Example Enter JVC News 38 EN Edit From a Camcorder Another Video Recorder Set the input mode of recording deckAdvantages of S-VHS video recorders Start the source player Output/Input Set Decoder connector Select and L-2 Input Setting Simple Connections Connecting To a Satellite Receiver Perfect Connections 44 EN Select the input modeConnect the decoder Set the tuner Make connections Connecting/Using a Stereo System Access the Mode Set screen Mode SetSelect the mode Select the mode setting When this function is set to ON, the timer is automatically When viewing overplayedDisengaged when the recorder is powered back on System to on or OFF pg Entire programme while timer-recording in SP mode On the remote control, or press 7 on the recorder48 EN Function pg , set PROG. Navigation to OFF Power consumption while the recorder is turned off When this function is set to ON, you can reduceWhen this function is set to ON, you can automatically Correct vertical vibration in the picture when playing back About Ntsc Playback 50 EN Guide Program Number Set Showview System SetupGuide Program Number Enter the Guide Program number Tuner Set Access the Auto Channel Set screen52 EN Auto Channel Set Press OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 54 EN Delete a Channel When Receiving a Scrambled Broadcast Set Stations B 56 ENSet Stations a Station Name TV Station And ID List 58 EN Access the Clock Set screenClock Set Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation Exit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 60 EN Power Recording 62 EN Other Problems Playback 64 EN Memory backup time Approx min Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines VHS 66 EN Memo Country code International telephone Language code