JVC HR-S7900U manual Basic Recording Features, 26 EN, Specifying recording length

26 EN BASIC PLAYBACK AND RECORDING (cont.)

Basic

Recording

Features

STOP/EJECT ( 7 / 0 )

A Changing display information

Press DISPLAY during recording or recording pause. Each time you press the button, the front display panel shows the time counter, tape remaining time, channel number and the clock time in sequence.

Time Counter	Tape Remaining Time
Clock Time		Channel No.

POWER

REC LINK

S VIDEO	VIDEO (MONO)L—AUDIO—R
	DIGITAL TBC/NR	SP	EP
			VCR

	REW
	PLAY
	–		+
			CH– /+
			PUSH / TURN
A.DUB
	24HR QUICK
	PROGRAM
INSERT	REC	PAUSE	STOP/EJECT

●To display the VCR status including the tape remaining time, the time counter and the clock time on the TV screen, see “Showing on-screen display” (☞ pg. 27).

●The approximate tape remaining time appears and the "" indicator lights on the front display panel.

●The tape remaining time is calculated based on the tape speed (SP or EP) being used. The indicated remaining time is only an estimate.

B

To reset the time counter, press C. RESET on the Remote. The counter reading becomes “0:00:00”. It is also reset when a tape is inserted.

B Specifying recording length

— Instant Timer Recording (ITR)

C –1

4

7

C. RESET

1

2 3

5 6

89

A

2

4

You can easily specify the recording length from 30Ê minutes to 6 hours and the VCR shuts off after recording is finished.

During recording, press REC ( ¦ ) on the front panel repeatedly until the recording length you want appears on the front display panel.

The (record) indicator starts blinking.

Each time you press the button, recording length increases in 30-minute intervals (up to 6 hours).

To cancel an ITR, press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.

C Watching one program while recording another

STOP ( 7 )

D

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its record safety tab.

To record on it later, cover the hole with adhesive tape.

Record safety tab

1 Engage TV mode

During recording...

●If you connect the TV and the VCR only using the RF connection (☞ pg. 7) to view pictures from the VCR

Press TV/VCR on the Remote so that VCR mode indicator goes off from the front display panel. (The TV broadcast being recorded disappears.)

●If you are using the AV connection (☞ pg. 7) to view pictures from the VCR, change the TV’s input mode from AV to TV.

2 Select channel for viewing

Select the channel, you want to watch, on the TV.