JVC HR-S9600EU Override Automatic Tracking, Adjust Tracking, Manually, Return to Automatic

Variable-Speed Search

ACTIVATE VARIABLE-SPEED SEARCH

1 During playback or still, turn the SHUTTLE ring to the right for forward variable-speed search, or to the left for reverse variable-speed search (refer to the illustration on page 16).

To resume normal playback, press PLAY.

NOTE:

Variable-speed search with TimeScan (☞ pg. 20) can be used by pressing the remote control's @ or #button.

Manual Tracking

Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons.

OVERRIDE AUTOMATIC

TRACKING

1	Press		on the remote to engage manual tracking.
		ADJUST TRACKING
2		MANUALLY
	Press TV PROG + or – to adjust tracking.
		RETURN TO AUTOMATIC
		TRACKING
	Press		on the remote to re-engage automatic
3 tracking.

NOTE:

When a new tape is inserted, the recorder enters the automatic tracking mode automatically.

Skip Search

		SKIP OVER UNWANTED
1		SECTIONS
	Press 30 SEC 1 to 4 times during playback. Each press
		initiates a 30-second period of fast-motion playback.
		Normal playback resumes automatically.

NOTE:

EN17

Index Search

Your recorder automatically marks

index codes at the beginning of£ 2 each recording. This function gives

you quick access to any one of 9 index codes in either direction.

NOTE:

Before starting, make sure the recorder is in the Stop mode.

ACTIVATE INDEX SEARCH

1 Press @ or # (ª or £). “ª 1” or “£ 1” is displayed on screen and search begins in the corre- sponding direction.

●To access index codes 2 through 9, press @or # repeatedly until the correct index number is displayed. Ex.: To locate the beginning of B from the current

position, press @twice.

To locate the beginning of D from the current position, press #once.

Current position

A	B		C	D E	F
–2		–1	1	2	3
		%		%

Index number

●When the specified index code is located, playback begins automatically.

Manual Index Mark/Erase

To mark an index code...

...during playback press INDEX MARK on the recorder.

●The recorder will mark an index code at that location.

●If "O.S.D." is set to "ON" (☞ pg. 11), "MARK" blinks on the screen while an index code is being marked.

To erase an index code...

...during playback or still press INDEX ERASE on the recorder.

●The recorder will fast-forward to the nearest index code and erase it. Playback continues after the index code is erased.

●If "O.S.D." is set to "ON" (☞ pg. 11), "ERASE" blinks on the screen while an index code is being erased.

Next Function Memory

The Next Function Memory "tells" the recorder what to do after rewinding. Before continuing, make sure the recorder is in the Stop mode.

a– For Automatic Start Of Playback After Tape Rewind . . .

. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press within 2 seconds.

c– For Automatic Timer Standby After Tape Rewind . . .

. . . press REW, then press (or TIMER) within 2 seconds.

To return to normal playback during a Skip Search, press PLAY.