JVC HR-S9600EU specifications Timer Warning, Satellite Tuner Users, ÄTIMER indicator

PUSH-OPEN	REC LINK	DIGITAL
		TBC / NR	TIMER

STANDBY/ON

REC LINKDIGITAL TBC / NRTIMER

äTIMER indicator TIMER

				EN	29
	SET TAPE SPEED
4 Press SP/LP (			) to set the tape speed.
5	SET VPS/PDC MODE
	Press VPS/PDC to select "ON" or "OFF".
	If "VPS/PDC	ON" is displayed on the screen or "VPS/
	PDC" is lit on the display panel, VPS/PDC is set to ON.
	If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"
	is not lit on the display panel, VPS/PDC is set to OFF.
	☞ "VPS/PDC Recording" on page 31.
	RETURN TO NORMAL SCREEN

1

2

VPS/PDC

1

PROG 2

STOP+/–

– –:– –

1 2 3

4 5 6

7 8 9

0

SP/LP

WEEKLY

3

4

4

3 OK

	Press PROG or OK. "PROGRAM COMPLETED" appears
		on the screen for about 5 seconds, then normal screen
6 appears.
		● Repeat steps 1 – 6 for each additional programme.
7		ENGAGE RECORDER’S TIMER MODE
	Press ä (or äTIMER). The recorder turns off automati-
		cally and ä appears on the display panel. The äTIMER
		indicator on the recorder also lights up.
		● To disengage the timer, press ä (or äTIMER) again.

NOTES:

● To Change The Stop Time . . .

￿

Satellite Tuner Users

To timer-record a satellite broadcast using SHOWVIEW:

1	Set "AV2 SELECT" to "AV2" (☞ pg. 44).
2	Perform steps 1 – 7.
3	Set the satellite tuner to the appropriate channel before
	the selected programme begins.

. . . press STOP +/– in step 3. You can compensate for anticipated programme schedule delays this way.

● To Timer-Record Weekly Or Daily Serials . . .

. . . in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday

– Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

● You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (☞ pg. 32).

● It is not possible to timer-record a TV programme with a SHOWVIEW number which starts with "0".

4 Leave the satellite tuner's power on.

ATTENTION

Regarding Guide Program Number Set

"GUIDE PROG SET" appears after performing step 3 if the Guide Program number for the SHOWVIEW number you entered has not been set.

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.

–WARNING– TIMER RECORDING

TO START SOON

[]

●Press the NUMBER keys or %Þ to input the channel position number on which your recorder receives that station, then press OK or #to set the Guide Program number. The SHOWVIEW program screen appears.

NOTES:

● The warning only appears if

you’re not in the Timer mode at that time.

● If this recorder is being used as the player for tape

GUIDE PROG SET

GUIDE PROG	TV PROG
2	– –
[5°] =
[PROG] : EXIT

(Ex.) To timer-record a ZDF programme with SHOWVIEW.

*If your recorder receives ZDF on the channel position 2, press OK or # after entering "2".

dubbing, the warning screen is recorded on the tape in

the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press .