Safety Precautions | JVC HR-S9600EU specification

2EN

SAFETYFIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

■When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

■Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This recorder can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.

4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

IMPORTANT

■Please read the various precautions on page 2 and 3 before installing or operating the recorder.

■It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

625

■Cassettes marked "S-VHS" and "VHS" can be used with this video cassette recorder. However, S-VHS recordings are possible only with cassettes marked "S-VHS".

■SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

Image 2

JVC HR-S9600EU specifications Safety Precautions

Contents

HR-S9600EU Safety Precautions For Italy Do not place the recorder Situate Recorder Check ContentsBasic Connections Connect Recorder to Mains Back of Recorder Video ConnectionConnect Recorder to TV If you are referring to the front display panel Auto Set UpEN Initial Settings If you are referring to the on-screen display Language Code Preset Download Just Clock If both auto channel set and auto clock set have failedLanguage for the on-screen display Just Clock on Language Return to Normal Screen ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays 13 14 OK or # Power Save ModeMode SET, then press SAVE, then press OK or #to set to on LI NK TV Auto Power OnLink Functions NexTView Link About Ntsc Playback Colour System SetMode Press %Þ to move the highlight bar pointer to Point Basic PlaybackLoad a Cassette Start Playback Activate HIGH-SPEED Search Playback FeaturesPlayback Manually Adjust TrackingOverride Automatic Tracking Return to Automatic Digital 3R Digital TBC/NR Instant ReView Activate Instant ReviewRepeat Playback Soundtrack Selection Audio signal during TimeScan TimeScan Move the highlight bar pointer to Time Scan Audio TimeScanSpeed SP Speed LP Audio output Basic Recording Recording Features Resume Recording Engage RECORD-PAUSE ModeLocate Start Point VHS Super VHS and VHS Recording Level Adjust AudioControl Screen Preparation S.T. Picture SystemEN Recording Or press Record on the recorder RecordingPlayback Timer Programming EN Timer Recording Satellite Tuner Users Timer WarningÄTIMER indicator Time Express Timer ProgrammingBefore performing Express Timer Programming Return to Normal SET VPS/PDC ModeTimer Mode Engage RECORDER’S Check, Cancel And Replace Programmes TE+ SET, then press OK or # Auto SP→LP TimerFor Example Then press OK or #to select OK or #to select either Auto TimerAuto TIMER, then press On or OFF Before performing the following steps Prog REC ModeAutomatic Satellite Programme Recording RE-SUPPLY Power Remote Control FunctionsSET Remote Control Code SET TV Brand Code TV Multi-brand Remote ControlControl Your TV Using Additional Buttons Operate TV SET Satellite Tuner Brand Code EN Special FeaturesSatellite Tuner Multi-Brand Remote Control Operate Satellite Tuner Preparation For Editing Access Mode SETControl SET Mode Select Picture Edit From Camcorder If the camcorder has no S-VIDEO output connector RecorderIf the camcorder has an S-VIDEO output connector Recorder Editing Repeat steps 4 6 as necessary Connector Lanc Cable not provided To Lanc connectorSynchro Editing Recorder Player Edit To Or From Another Video Recorder Your recorder NEL or Or AV Provided AV mode Mode Another recorderTV Receiver Your recorder TV Receiver Pin Scart Cable AV1 Select Setting AV2 Select Setting Start Dubbing SET Input ModeEngage Audio Dubbing END Audio Dubbing Insert Editing Locate END Point END Insert Editing Engage Insert EditingStart Editing Press Insert Prepare for Editing Access R.A. Edit ScreenRandom As- semble Editing Load Source Cassette Start R.A. Edit Locate EDIT-IN PointLocate EDIT-OUT Point END R.A. Edit Access Jlip ID NO. SET Screen Access Main Menu ScreenAccess Initial SET Screen SET Jlip ID Number System Connections Connection ToTuner Simple Connections Perfect Connections Connector ScartEN System Connections Satellite Tuner Unit Back of Recorder Mains outlet ConnectorBasic Connections Decoder Connect Decoder Connecting Using a DecoderSelect Input Mode SET Tuner Rear View Connecting Using a Stereo SystemSpeaker Television Mains outlet EN Subsi Diary Sett Ings Access Auto CH SETTuner Set Auto Channel Set Perform Auto Channel SET View Confirmation Screen SU Bsidiary Settings Storing Channels Manually Change Station Channel Position When Receiving a Scrambled BroadcastDelete a Channel Press %Þ @ #until the item you want to move begins Channel SET Screen Access ManualSwitch Stations Select NEW Station TV Station And ID List Select Channel to Perform TuningFine-Tuning Channels Already Stored FINE-TUNE Video Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET RF Output System Turn the Recorder on Access Initial SETClock Set SET Date and Time SET Just Clock Start Clock Operation Enter Receiving Channel Position Number Showview SetupNumber Guide Program Number Set Troubleshooting EN Timer Recording Roubleshooting Ä remain lit on the display panel. Is there Problem? Quest Ions and Answers Index Front View Inside View of Front Panel Rear View Remote Control Remote Control LCD Speci Fications PAL-type colour signal and CcirProvided accessories International Telephone Language Code Ex. Deutschland is selectedEx. Francais is selected for Belgium