JVC HR-S9600EU specifications Insert Editing, Locate END Point

46ENEDITING(cont.)

Insert Editing

Recorder Your recorder

C.RESET/CANCEL

Audio/Video signal

S-video signal

		Another recorder
Player
			JOG
			8
1	3
	2		SHUTTLE
TV	PROG	PAUSE

Insert editing replaces part of the recorded scene with new material. Both the picture and Hi-Fi audio soundtrack are replaced with new ones, while the normal audio soundtrack remains unchanged. If you wish to change the normal audio track as well, use the audio dubbing function simultaneously. Use your video recorder as the recorder.

Source tape

			Before insert editing		Normal
Recorded tape					Audio track
				After insert editing
					Video/Hi-Fi
					audio track
		MAKE CONNECTIONS
	Connect the player's VIDEO OUT or S-VIDEO OUT
		and AUDIO OUT connectors to your recorder's VIDEO
1 or S-VIDEO and AUDIO input connectors on the front
		panel.
2		SET INPUT MODE
	Press NUMBER key "0" and/or TV PROG so that "F-1"
		for the VIDEO/AUDIO input connectors or "S-1" for
		S-VIDEO/AUDIO input connectors appears in place of
		a channel number.
		LOCATE END POINT
	Load the recording cassette into your recorder, and play
		it back to determine the edit-out point (the end of the
3 segment to be replaced) using the SHUTTLE ring or the
		JOG dial or pressing @#and PAUSE.
		RESET THE COUNTER
	Press 0000 (or C.RESET/CANCEL) to change the counter
4 display to "0:00:00".

	1
	2
NU	1	2
M	4	5
BE
R
	"
	0
	"	8
	7
0000		0
	1
	2

– –:– –

3

6

9

3

4

4

3

TV PROG

5		LOCATE START POINT
	Determine the edit-in point (the beginning of the
		segment to be replaced) using the SHUTTLE ring or the
		JOG dial or pressing @#and PAUSE.
		● Be sure to engage the Still mode at the edit-in point.

PAUSE

￿