Remote Control Functions, SET Remote Control, Code | JVC HR-S9600EU

36ENSPECIALFEATURES

Remote

Control

Functions

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control’s A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

REMOVE POWER SUPPLY

1 Unplug the mains power cord from the mains outlet.

SET REMOTE CONTROL

CODE

Press and hold VCR on the remote control for over 2

2 seconds, press the NUMBER key "2" and then press OK.

VCR

1

2

NUMBER "1"

1

– –:– –

1 2 3

4 5 6

7 8 9

0

3

4

4

3


			RE-SUPPLY POWER
		3 Plug the mains power cord back into the mains outlet.
			TURN THE RECORDER ON
	OK	Press					on the remote control. The recorder will now
	OK	4 only respond to B code signals.
		4 only respond to B code signals.

2

NOTE:

To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.

Image 36

JVC HR-S9600EU specifications Remote Control Functions, SET Remote Control, Code, RE-SUPPLY Power, EN Special Feat Ures

Contents

HR-S9600EU Safety Precautions For Italy Do not place the recorder Check Contents Basic ConnectionsSituate Recorder Connect Recorder to Mains Video Connection Connect Recorder to TVBack of Recorder Auto Set Up EN Initial SettingsIf you are referring to the front display panel If you are referring to the on-screen display Language Code Preset Download If both auto channel set and auto clock set have failed Language for the on-screen displayJust Clock Just Clock on Language ENABLE/DISABLE ON-SCREEN Display On-Screen DisplaysReturn to Normal Screen 13 14 Power Save Mode Mode SET, then pressOK or # SAVE, then press OK or #to set to on TV Auto Power On Link FunctionsLI NK NexTView Link Colour System Set ModeAbout Ntsc Playback Press %Þ to move the highlight bar pointer to Basic Playback Load a CassettePoint Start Playback Playback Features PlaybackActivate HIGH-SPEED Search Adjust Tracking Override Automatic TrackingManually Return to Automatic Digital 3R Digital TBC/NR Activate Instant Review Repeat PlaybackInstant ReView Soundtrack Selection Audio signal during TimeScan TimeScan TimeScan Speed SP Speed LP Audio outputMove the highlight bar pointer to Time Scan Audio Basic Recording Recording Features Engage RECORD-PAUSE Mode Locate Start PointResume Recording VHS Super VHS and VHS Adjust Audio Control ScreenRecording Level S.T. Picture System EN RecordingPreparation Recording PlaybackOr press Record on the recorder Timer Programming EN Timer Recording Timer Warning ÄTIMER indicatorSatellite Tuner Users Express Timer Programming Before performing Express Timer ProgrammingTime SET VPS/PDC Mode Timer ModeReturn to Normal Engage RECORDER’S Check, Cancel And Replace Programmes TE+ Auto SP→LP Timer For ExampleSET, then press OK or # Then press OK or #to select Auto Timer Auto TIMER, then pressOK or #to select either On or OFF Prog REC Mode Automatic Satellite Programme RecordingBefore performing the following steps Remote Control Functions SET Remote ControlRE-SUPPLY Power Code TV Multi-brand Remote Control Control Your TV Using Additional ButtonsSET TV Brand Code Operate TV EN Special Features Satellite Tuner Multi-Brand Remote ControlSET Satellite Tuner Brand Code Operate Satellite Tuner Access Mode SET Control SET ModePreparation For Editing Select Picture If the camcorder has no S-VIDEO output connector Recorder If the camcorder has an S-VIDEO output connector RecorderEdit From Camcorder Editing Connector Lanc Cable not provided To Lanc connector Synchro EditingRepeat steps 4 6 as necessary Recorder Player Edit To Or From Another Video Recorder NEL or Or AV Provided AV mode Mode Another recorder TV ReceiverYour recorder Your recorder TV Receiver Pin Scart Cable AV1 Select Setting AV2 Select Setting SET Input Mode Engage Audio DubbingStart Dubbing END Audio Dubbing Insert Editing Locate END Point Engage Insert Editing Start EditingEND Insert Editing Press Insert Access R.A. Edit Screen Random As- semble EditingPrepare for Editing Load Source Cassette Locate EDIT-IN Point Locate EDIT-OUT PointStart R.A. Edit END R.A. Edit Access Main Menu Screen Access Initial SET ScreenAccess Jlip ID NO. SET Screen SET Jlip ID Number Connection To TunerSystem Connections Simple Connections Connector Scart EN System ConnectionsPerfect Connections Satellite Tuner Unit Connector Basic ConnectionsBack of Recorder Mains outlet Decoder Connecting Using a Decoder Select Input ModeConnect Decoder SET Tuner Connecting Using a Stereo System Speaker Television Mains outletRear View Access Auto CH SET Tuner SetEN Subsi Diary Sett Ings Auto Channel Set Perform Auto Channel SET View Confirmation Screen SU Bsidiary Settings Storing Channels Manually When Receiving a Scrambled Broadcast Delete a ChannelChange Station Channel Position Press %Þ @ #until the item you want to move begins Access Manual Switch StationsChannel SET Screen Select NEW Station TV Station And ID List Perform Tuning Fine-Tuning Channels Already StoredSelect Channel to FINE-TUNE Access Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET RF Output System Access Initial SET Clock SetTurn the Recorder on SET Date and Time SET Just Clock Start Clock Operation Showview Setup NumberEnter Receiving Channel Position Number Guide Program Number Set Troubleshooting EN Timer Recording Roubleshooting Ä remain lit on the display panel. Is there Problem? Quest Ions and Answers Index Front View Inside View of Front Panel Rear View Remote Control Remote Control LCD PAL-type colour signal and Ccir Provided accessoriesSpeci Fications Ex. Deutschland is selected Ex. Francais is selected for BelgiumInternational Telephone Language Code