| Reverse |
|
|
|
| Forward | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Reverse search | Reverse play | Reverse slow | Slow motion | Normal play | Forward search | ||
| motion | |||||||
|
|
|
|
|
|
|
| |
SP | 1/18, 1/6, 1/2 | 1 | 2, 3, 5, 7, 11 |
| ||||
|
|
|
|
|
|
|
| |
EP | 1/18, 1/6, 1/2 | 1 | 2, 3, 7, 21, 31 |
| ||||
|
|
|
|
|
|
|
|
|
●You can see smooth slow motion picture only during 1/2x slow motion playback.
When the tape is not running
Rewind/fast-forward
On the VCR
Turn the ADVANCED JOG dial to the left to rewind the tape, or right to
On the Remote
Press REW (3) to rewind the tape, or FF (5) to
Eject the cassette
Press STOP/EJECT (0) on the VCR.
●You can also eject the cassette when the VCR is turned off.
Turn off the VCR
Press POWER.
Playback Features
●Turn on the VCR and TV, and select the VCR channel (or AV mode).
●Set the VCR/TV/CABLE/DBS selector on the Remote to “VCR”.
Adjusting tracking condition
— Tracking Adjustment
Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during playback, follow the procedures below.
APress CH + and – on the VCR simultaneously during playback to activate manual tracking.
BPress CH + or – to eliminate the noises. Press it briefly for a fine adjustment, or press and hold for a coarse adjustment.
●Press CH + and – simultaneously again to reactivate automatic tracking.
Selecting monitor sound
— Audio Monitor
While playing back a tape on which stereo sound or SAP sound is recorded, press A.MONITOR on the Remote. Each time you press the button, sound changes.
NORM: Sound on the normal track is played back.
NORM
NOTES:
●The above indication appears when “SUPERIMPOSE” is set to “ON” ( pg. 20), though the monitor sound changes in sequence.
●You can also use the menu (“AUDIO MONITOR”) to select your desired monitor sound. ( pg. 20)
Automatic operations after rewinding
— Next Function Memory
The Next Function Memory “tells” the VCR what to do after rewinding is complete. Ensure that the VCR is in stop mode.
●For Automatic Playback Start
Press REW (3), then press PLAY (4) within 2 seconds.
●For Automatic Power Off
Press REW (3), then press POWER within 2 seconds.
●For Automatic Timer Standby
Press REW (3), then press TIMER (#) within 2 seconds.
NOTE:
It is not possible to select the Automatic Timer Standby function if the cassette’s record safety tab is removed.
Playing back tape repeatedly (100 times)
— Repeat Play
During playback, press and hold PLAY (4) for more than
5 seconds. The play indicator ( u) on the display panel starts blinking slowly. To stop playback, press STOP (8) on the Remote or STOP/EJECT (0) on the VCR.
Locating beginning of recordings
— Index Search
When recording on this VCR, index codes are placed on the tape at the beginning of each recording.
AWhile the tape is not running, press 2or 6on the Remote to start search.
BTo access a recording of 2 to 9 index codes away, press 2 or 6 repeatedly until the correct number is
displayed on the screen (only if “SUPERIMPOSE” is set to “ON” ( pg. 20)). Playback begins automatically when the desired recording is located.
|
| Beginning of the |
| Current | Beginning of the | |||||||||||
|
| current program |
|
|
| position on | 2nd next program | |||||||||
|
| recorded |
|
| the tape | recorded | ||||||||||
|
| Previous |
|
|
|
|
|
| Next | 2nd | next | |||||
|
|
|
|
|
|
|
| |||||||||
|
| program |
|
|
|
|
| program | ||||||||
|
| recorded |
|
|
|
|
| recorded |
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
— 11 —
