Express Timer Programing, 24HR Quick Programing

Express Timer Programing

Load a cassette with the record safety tab intact. The VCR turns on, and the counter is reset, automatically.

APress PROG. on the Remote to access the PlusCode No. screen.

B Press START+/– once to access Program screen.

Press START+/–,STOP+/–,DATE+/– or CH+/– repeatedly to enter the start time, stop time, date or channel.

●Press and hold START+/– or STOP+/– to increase the time in 30-minute

intervals.

●To set the tape speed, press SP/EP (p).

●To timer-record daily (Monday–Friday) or weekly serials, press DAILY (M-F) (Number key “8”) or WEEKLY (Number

key “9”). Pressing the button again makes the “DAILY” or “WEEKLY” display disappear.

● If you are using a DBS receiver and “DBS RECEIVER SET” is set to “ON”, the band indication appears under the channel number indication. (Refer to “Cable Box and/or DBS

Receiver Control Setting” ( pg. 8).) TV: To timer-record a regular TV

broadcast received on the VCR.

CATV: To timer-record a cable TV broadcast received on the VCR, or through a cable box (unless “CABLE BOX SET” is set to “OFF”).

DBS: To timer-record a satellite broadcast received through a DBS receiver.

If the channel number entered requires that the band be set and “7=DBS” is displayed on the screen, press DBS (Number key “7”) to select “DBS”.

CPress OK or PROG..

●If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, see “Program overlap warning display” ( pg. 16).

DPress TIMER (#). The VCR turns off automatically and “#” is displayed on the display panel.

24HR Quick Programing

You can program a timer recording that starts within 24 hours using the ADVANCED JOG dial on the VCR.

Load a cassette with the record safety tab intact. The VCR turns on, and the counter is reset, automatically.

APress 24HR QUICK PROGRAM on the

VCR. “” starts blinking on the display panel.

NOTES:

●If “Err” appears on the display panel, repeat the above steps again.

●When a menu screen is shown, you cannot use 24HR Quick Programing function. Press MENU to return to normal screen, and try again.

●You can use 24HR Quick Programing function also when the VCR is turned off.

●For 24HR Quick Programing function, the program overlap warning display does not appear even if some programs overlap each other.

To use the VCR while it is in timer recording standby mode

Press TIMER (#), then press POWER. After you use the VCR, press TIMER (#) again to put the VCR into timer recording standby mode.

Checking, canceling or changing program settings

ADisengage timer

Press TIMER (#), then press POWER.

●When “AUTO TIMER” is set to “ON” ( pg. 20), you do not have to press TIMER (#).

B Access Program Check screen

Press PROG. CHECK.

C Access Program screen

Press PROG. CHECK again. Each time you press PROG. CHECK, the next program’s Program screen appears.

DCancel or change program setting

To cancel a program, press CANCEL when the Program screen you do not want is shown.

To change a program, press the appropriate button: START+/–,STOP+/–,DATE+/–,CH+/–,DAILY (M-F) (Number key “8”), WEEKLY (Number key “9”), and/or SP/EP (p) when the Program screen on which you want to make changes is shown.

EReturn to normal screen

Press PROG. CHECK repeatedly until no Program screen is shown.

FReengage timer recording standby mode

Press TIMER (#). The VCR turns off automatically and “#” is displayed on the display panel.

● When “AUTO TIMER” is set to “ON” ( pg. 20), the timer

BTurn the ADVANCED JOG dial to the left or right to set the start time.

●One click stop of the ADVANCED JOG dial changes the time in 5- minute intervals.

CPush the ADVANCED JOG dial. “ ” starts blinking on the display panel. Turn the ADVANCED JOG dial to the left or right to set the stop time.

●To set the tape speed, press SP/EP (p).

Start time

Stop time

Channel number

recording standby mode automatically resumes when you turn

off the VCR.

D Push the ADVANCED JOG dial. Turn the ADVANCED JOG dial to the left or right to select the channel, then press 24HR QUICK PROGRAM. The VCR turns off automatically and “#” is displayed on the display panel.