JVC HR-VP48U manual Tuner Setting, Access Tuner Set screen, Perform Auto Channel Set

PRESS (5,°), THEN (OK)

PRESS (MENU) TO END

EN 13

Tuner Setting

Turn on the VCR and the TV, and select the VCR channel 3 or 4 (or AV mode) on the TV.

14

23

SP EP

VCR

23

1 2 3

2

4 5 6

7 8 9

0 4

1

14 23 23

Setting channels

automatically — Auto Channel Set Use Auto Channel Set only if channels have not been set correctly by the Plug & Play setting or if you use a cable box. If you want to add or delete channels, use Manual Channel Set ( pg. 14).

1Access Main Menu screen

Press MENU.

2Access Tuner Set screen

On the front panel:	MAIN MENU
Press CH5° to move	FUNCTION SET
the highlight bar (arrow)	=TUNER SET
to “TUNER SET”, then	INITIAL SET
press OK.

On the Remote:

Press SHUTTLE PLUS

5° to move the highlight bar (arrow) to “TUNER SET”, then press OK or SHUTTLE PLUS 3.

Perform Auto Channel Set
3 You can automatically	TUNER SET
set the receivable	BAND	CATV
channels in your area in
	=AUTO CHANNEL SET
the order of their	MANUAL CHANNEL SET
frequencies.
On the front panel:
	SELECT WITH (5,°) AND (OK)
Press CH5° to move	PRESS (MENU) TO END
the highlight bar (arrow)	AUTO CHANNEL SET
to “AUTO CHANNEL
SET”, then press OK.
On the Remote:	SCANNING...
Press SHUTTLE PLUS
5° to move the
highlight bar (arrow) to	PRESS (MENU) TO END
“AUTO CHANNEL

SET”, then press OK or SHUTTLE PLUS 3.

NOTES:

When Auto Channel Set is complete, “SCAN COMPLETED” appears on screen.

If the scan was unsuccessful, “SCAN COMPLETED– NO SIGNAL” appears on screen. Check the connections and start again.

4Return to normal screen

Press MENU.

INFORMATION

The VCR selects the correct band (TV or CATV) automatically during Auto Channel Set.

The selected band will be displayed on the right side of “BAND” on the Tuner Set screen.