Make Connection, Tape Position Indicator | JVC HR-VP830U specs

POWER	PLAY	SCAN SHUTTLE
		TIME

	8
• •	• • •
•	•
• •	• •
MENU	FF
MENU	REW

POWER

1 2 3

4

5

6

7 8 9

33

Tape Position Indicator

The Tape position indicator
appears on screen when, from the
stop mode, you press FF, REW, or
use the TIME SCAN SHUTTLE ring,				+	+	+
or perform an Index Search or			B	+	+	+	E
Instant ReView. The position of "
" in relation to "B" (Beginning) or				COUNT			0:33:27
"E" (End) shows you where you are				COUNT			0:33:27
on the tape.

NOTE:

"SUPERIMPOSE" must be set to "ON", or the indicator will not appear (☞ pg. 30).

Next-Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding. * Before continuing, ensure that the VCR is in stop mode.

a– For Automatic Start Of Playback After Tape Rewind . . .

. . . press REW, then press PLAY within 2 seconds. b– For Automatic Power Off After Tape Rewind . . .

. . . press REW, then press POWER within 2 seconds. c– For Automatic Timer Standby After Tape Rewind . . .

. . . press REW, then press TIMER within 2 seconds.

NOTE:

0

LAY

REW

C.MEMORY

MENU

TIMER

FF

If you want the "next function" to automatically start when the counter reads "0H 00M 00S" (instead of at the beginning of the tape), press C. MEMORY so that the counter memory indicator appears on the front display panel before pressing REW or FF.

AV COMPU LINK Playback

Your VCR is compatible with JVC’s AV COMPU LINK components, including amplifiers (or receivers) and televisions. AV COMPU LINK provides one touch control of the audio and video compo- nents that are linked via their AV COMPU LINK connectors.

For example: simply load a cassette in the VCR and press PLAY and the AV COMPU LINK components automatically power on, the TV's VIDEO mode is selected and the VCR goes into play mode. (PLAY need not be pressed if the cassette's record safety tab is removed.)

1	MAKE CONNECTION
	Connect your VCR to an AV COMPU LINK component
	as shown in the illustration on page 34.

	● The mini-plug cable is a mono 3.5 mm mini-plug to
	mono 3.5 mm mini-plug connector.

2	TURN ON THE VCR
2	Press POWER.
	ACCESS MAIN MENU
3	SCREEN
3	Press MENU as many times as necessary.

CONTINUED ON NEXT PAGE.

Image 33

JVC HR-VP830U manual Make Connection, Tape Position Indicator, Next-Function Memory, AV Compu Link Playback

Contents

HR-VP830U Do not place the VCR Dear Customer Power Cord Protection Power SourcesPower Lines Grounding or Polarization Damage Requiring Service AccessoriesCleaning Replacement Parts Contents Basic Connections Dual Quick Set Initial SettingsPerform Dual Quick SET Auto Clock Set/Auto Tuner Set Access Custom SET Screen Access ON-SCREEN MenuLanguage Turn on the VCR Clock PreparationOverride Auto Select Host Channel Access Select ScreensSelect Time Zone Semi-Auto Select Mode Select D.S.T. ModeSET DATE, Time and D.S.T Make Corrections Tuner Return to Normal Screen Perform Auto Channel SET Access AFC Screen Access Tuner SET ScreenMake Selection Store Desired Channel Situate Controller Cable Box ControlAttach Controller Connect Cable BOX to VCR Scan 5 to place Press CH5 or TimeArrow next to Custom SET, then press OK Turn on Cable BOX Access Cable BOXBrand SET Screen Set Cable Box Brand Brand Code You can now set up the VCR Plus+ feature pg Access Main Menu Screen VCR Plus+ SetupChannel Number Matching Special Notes for Cable Subscribers Scan 5 to place Arrow next to Guide ProcedureChannel SET, then Press CH5, Time Scan Check Input Data Input Receiving Channel Number Connect DSS Receiver to VCR DSS Receiver ControlDSS receiver Controller Transmitter Connected to Set DSS Receiver Output Channel Return to Custom SET Screen Turn on DSS Receiver Enter DSS Receiver BrandSet DSS Receiver Brand Load a Cassette Simple PlaybackFind Program Start Point Start Playback Simple Recording Activate FRAME-BY Frame Playback Pause During PlaybackPlayback and Recording FEA Tures Still Picture/Frame-By- Frame Playback Adjust Manual Tracking ModeEngage Manual Tracking Select The Soundtrack Superimpose Start Search Access Distant CodeIndex Search Manual Index Mark/Erase Activate Counter Activate Instant ReviewMemory Return to Counter Position Zero Make Connection Tape Position IndicatorNext-Function Memory AV Compu Link Playback Access Function SET Screen Activate HIGH-SPEED Search TimeScanHigh-Speed Search 7x playback Variable-Speed Search/ Reverse Play Skip Search Skip Over Unwanted Sections TimeScan Audio Timescan Audio byOr Time Active Video Calibration VCR takes about Seconds to assess RecordingQuality of the tape Use, then recording Begins with the picture level optimized Tape in use Playback Reset Counter to Zero Engage TV ModeSelect Channel for Viewing Display Elapsed Time on Screen Access 2ND Audio Access Function SETReturn to Normal Stereo And SAP Second Audio Program Access HI-FI REC Level Adjust Audio RecordING Level Access VCR PLUS+ Screen VCR Plus+ Timer ProgrammingWhen Using The Illumi-Guide Feature Enter Pluscode Number Press TIMER. The VCR turns off automatically Engage Timer ModeCHECK/CORRECT Input Data Press SP/EP Access Program SET Access ON-SCREENTimer Recording On-Screen SET Program Information If you program the VCR to timerRecord a show on September On channel 40 from 1200 noon To 100 PM in SP mode, Cancel a Program Disengage TimerRE-ENGAGE Timer Check And Cancel Programs Access Auto Timer Access Auto Timer ScreenAuto Timer Or, during on-screen timer programming Engage ITR Mode Instant Timer Recording ITRSET Recording Duration Press REC on the front panel Edit To Or From Another Edit From a Camcorder Access SpecialSET RECORDER’S Input Mode Set the camcorder to its play mode Access AUX Input ScreenSet your VCR to its record mode Select Input Assemble Editing Locate Start Point SET Input ModeEngage Audio Dubbing Start Dubbing Locate END Point Reset the Counter END Insert Editing Engage Insert Editing Prepare for Editing Random As- semble EditingLoad Source Cassette CH5 or Time SCAN5 Locate EDIT-OUT Point Locate EDIT-IN PointStart R.A. Edit Prepare Recording Deck Turn on the TV SET Remote Control ModeSET TV Brand Code Operate TV Turn on the Cable BOX Cable Box Multi-Brand Remote ControlEnter Cable BOX Brand Operate Cable BOX SET A/B Code Switch Unplug Vcrs PowerPlug in Power Cord Turn VCR Power on Symptom TroubleshootingCassette gets stuck partway Make sure the window side is up, Oubleshooting Timer again Re-perform the VCR Plus+ setup Doesn’t work properly When scanning channels, someResume recording Remote control won’t operate Can the VCR indefinitely remain in the still mode? Questions and AnswersCan the VCR indefinitely remain in the Record-Pause mode? What happens if the tape runs out during recording? VCR Plus+ Timer Programming MBR Multi-Brand Remote Code SettingIndex List Of Terms Front View Front Display Panel Remote Control Provided 20C to 60C -4F to140F EIA monochrome signalMaximum recording time Frequency-synthesized tuner For Servicing HOW to Locate Your JVC Service Center Limited Warranty Warranty Memo EMO Page HR-VP830U