When scanning channels, some | JVC HR-VP830U manual

65

8.

Timer recording begins as sched-

● Even though you don't use an

Set "CABLE BOX OUTPUT" to "OFF"

uled, but the channel is always

external Cable Box, "CABLE BOX

(☞ pg. 17).

incorrect.

OUTPUT" is set to "ON".

9.

We moved, and now VCR Plus+

● The receivable stations in the new area

Re-perform the VCR Plus+ setup

doesn’t work properly.

are received on different channels than

procedure (☞ pg. 19).

those in the previous area.

10.“PROGRAM FULL” is displayed on

● All 8 programs of the VCR’s timer

Wait until a space in memory clears,

the VCR Plus+ screen.

memory are used.

or cancel unnecessary program

information (☞ pg. 48).

OTHER PROBLEMS

SYMPTOM

POSSIBLE CAUSE

CORRECTIVE ACTION

1.

When scanning channels, some of

● Those channels have been preset to

If you need the skipped channels,

them are skipped over.

be skipped.

restore them (☞ pg. 14).

2.

The channel can’t be changed.

● Recording is in progress.

Press PAUSE to pause the recording,

change channels, then press PLAY to

resume recording.

3.

The remote control won’t operate

● The TV/CABLE/VCR switch is set to

Set the switch to TV.

my TV.

a position other than TV.

4.

The remote control won't operate

● The TV/CABLE/VCR switch is set to

Set the switch to CABLE.

my cable box.

a position other than CABLE.

5.

Even though Auto or Semi-Auto

● The clock setting data received from

Select a different Host Channel during

clock setting has been selected, the

the Host Channel is incorrect.

the Semi-Auto setting procedure

clock is incorrect.

(☞ pg. 10), or perform the Manual

setting procedure (☞ pg. 11).

ATTENTION:

This recorder contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases, switch the power off and unplug the power cord. Then plug it in again and switch power on. Take out the cassette. After checking the cassette, operate the unit as usual.

Image 65

JVC HR-VP830U manual Re-perform the VCR Plus+ setup Doesn’t work properly, When scanning channels, some

Contents

HR-VP830U Do not place the VCR Dear Customer Power Cord Protection Power SourcesPower Lines Grounding or Polarization Damage Requiring Service AccessoriesCleaning Replacement Parts Contents Basic Connections Dual Quick Set Initial SettingsPerform Dual Quick SET Auto Clock Set/Auto Tuner Set Access Custom SET Screen Access ON-SCREEN MenuLanguage Turn on the VCR Override Auto ClockPreparation Select Host Channel Access Select ScreensSelect Time Zone Semi-Auto Select Mode Select D.S.T. ModeSET DATE, Time and D.S.T Make Corrections Tuner Return to Normal Screen Perform Auto Channel SET Access AFC Screen Access Tuner SET ScreenMake Selection Store Desired Channel Situate Controller Cable Box ControlAttach Controller Connect Cable BOX to VCR Scan 5 to place Press CH5 or TimeArrow next to Custom SET, then press OK Turn on Cable BOX Access Cable BOXBrand SET Screen Set Cable Box Brand Brand Code You can now set up the VCR Plus+ feature pg Access Main Menu Screen VCR Plus+ SetupChannel Number Matching Special Notes for Cable Subscribers Scan 5 to place Arrow next to Guide ProcedureChannel SET, then Press CH5, Time Scan Check Input Data Input Receiving Channel Number Connect DSS Receiver to VCR DSS Receiver ControlDSS receiver Controller Transmitter Connected to Set DSS Receiver Output Channel Return to Custom SET Screen Set DSS Receiver Brand Turn on DSS ReceiverEnter DSS Receiver Brand Load a Cassette Simple PlaybackFind Program Start Point Start Playback Simple Recording Activate FRAME-BY Frame Playback Pause During PlaybackPlayback and Recording FEA Tures Still Picture/Frame-By- Frame Playback Adjust Manual Tracking ModeEngage Manual Tracking Select The Soundtrack Superimpose Start Search Access Distant CodeIndex Search Manual Index Mark/Erase Activate Counter Activate Instant ReviewMemory Return to Counter Position Zero Make Connection Tape Position IndicatorNext-Function Memory AV Compu Link Playback Access Function SET Screen Activate HIGH-SPEED Search TimeScanHigh-Speed Search 7x playback Variable-Speed Search/ Reverse Play Skip Search Skip Over Unwanted Sections Or Time TimeScan AudioTimescan Audio by Active Video Calibration VCR takes about Seconds to assess RecordingQuality of the tape Use, then recording Begins with the picture level optimized Tape in use Playback Reset Counter to Zero Engage TV ModeSelect Channel for Viewing Display Elapsed Time on Screen Access 2ND Audio Access Function SETReturn to Normal Stereo And SAP Second Audio Program ING Level Access HI-FI REC LevelAdjust Audio Record Access VCR PLUS+ Screen VCR Plus+ Timer ProgrammingWhen Using The Illumi-Guide Feature Enter Pluscode Number Press TIMER. The VCR turns off automatically Engage Timer ModeCHECK/CORRECT Input Data Press SP/EP Access Program SET Access ON-SCREENTimer Recording On-Screen SET Program Information If you program the VCR to timerRecord a show on September On channel 40 from 1200 noon To 100 PM in SP mode, Cancel a Program Disengage TimerRE-ENGAGE Timer Check And Cancel Programs Access Auto Timer Access Auto Timer ScreenAuto Timer Or, during on-screen timer programming Engage ITR Mode Instant Timer Recording ITRSET Recording Duration Press REC on the front panel Edit To Or From Another Edit From a Camcorder Access SpecialSET RECORDER’S Input Mode Set the camcorder to its play mode Access AUX Input ScreenSet your VCR to its record mode Select Input Assemble Editing Locate Start Point SET Input ModeEngage Audio Dubbing Start Dubbing Locate END Point Reset the Counter END Insert Editing Engage Insert Editing Prepare for Editing Random As- semble EditingLoad Source Cassette CH5 or Time SCAN5 Locate EDIT-OUT Point Locate EDIT-IN PointStart R.A. Edit Prepare Recording Deck Turn on the TV SET Remote Control ModeSET TV Brand Code Operate TV Turn on the Cable BOX Cable Box Multi-Brand Remote ControlEnter Cable BOX Brand Operate Cable BOX SET A/B Code Switch Unplug Vcrs PowerPlug in Power Cord Turn VCR Power on Symptom TroubleshootingCassette gets stuck partway Make sure the window side is up, Oubleshooting Timer again Resume recording Remote control won’t operate Re-perform the VCR Plus+ setup Doesn’t work properlyWhen scanning channels, some Can the VCR indefinitely remain in the still mode? Questions and AnswersCan the VCR indefinitely remain in the Record-Pause mode? What happens if the tape runs out during recording? VCR Plus+ Timer Programming MBR Multi-Brand Remote Code SettingIndex List Of Terms Front View Front Display Panel Remote Control Provided 20C to 60C -4F to140F EIA monochrome signalMaximum recording time Frequency-synthesized tuner For Servicing HOW to Locate Your JVC Service Center Limited Warranty Warranty Memo EMO Page HR-VP830U