44
VCR Plus+
Timer
Programming
Before VCR Plus+ Timer programming, see "VCR Plus+ Setup" on page 19.
Timer recording allows you to program the VCR to automatically record a program which will be broadcast at some future time.
The timer record function can be programmed using VCR Plus+ or
During VCR Plus+ and
|
|
| 8 | 1 |
•• • • • •• |
|
|
| |
• • • • |
|
|
|
|
|
| OK |
| 2 |
| 1 | 2 | 3 | |
|
| |||
NUMBER | 4 | 5 | 6 |
|
|
|
|
| |
| 7 | 8 | 9 |
|
CANCEL |
| 0 |
|
|
|
|
|
| |
|
|
| TV/CABLE/VCR |
|
OK | 3 |
|
MENU
ILLUMI GUIDE
When Using The Illumi-Guide Feature
●Buttons light or blink on the remote control for approximately 10 seconds. If the button or buttons extinguish during timer programming, press ILLUMI GUIDE and the button or buttons previously lit or blinking come back on. If the button or buttons do not
●If for some reason the remote control's signal is not received by the VCR, press MENU as many times as necessary to return to the normal screen and extinguish all illuminated buttons, and
LOAD A CASSETTE
Make sure the record safety tab is present.
●The VCR’s power comes on automatically.
ACCESS VCR PLUS+ SCREEN
To use the
● The clock must be set in order to access the VCR
Plus+ screen. If you haven’t set the clock, the Main Menu screen appears when you press MENU. Refer to page 7 for the Dual Quick Set procedure or page 9 for the clock setting procedure.
●If you are using the
ENTER PLUSCODE NUMBER
Press the appropriate NUMBER keys to enter the PlusCode number printed in the TV listings for the TV program you wish to record.
●To make corrections, press CANCEL and input the correct PlusCode number.
●If the PlusCode number you input is incorrect, "ERROR" may appear on the screen to advise you of the error. This happens when the PlusCode number is for a program which has already passed. "ERROR" is displayed for about 4 seconds and the VCR Plus+ screen reappears (step 2).
●If you are using the
