TV multi-brand remote control

The DVD/VCR’s remote control can control several functions on JVC remote control TVs and on the brands of remote control TVs listed below.

NOTE:

Depending on the type of TV, there may be cases where some or all functions cannot be operated using the remote control.

Preparation:

•Turn the power off the TV using theTV’s remote control.

•Make sure TV/VCR/DVD switch has been slided to TV.

1 Press and hold VCR on the remote control until you finish the step 2.

2 Enter your TV’s brand code using the Number keys, then press ENTER.

•Once you have set the remote control to operate the TV, you don’t have to repeat this step until you replace your remote control’s batteries.

•PANASONIC has two codes. If the TV does not function with one code, try entering the other.

3 First, press TV POWER on the remote to see if the TV’s power goes on as it should. If it does, try other operations.

•The TV POWER, TV CH+/–,TV VOL+/–,ENTER, INPUT and Number keys on the remote can all be used to operate the TV. *For some brands of TV, you must press ENTER after having pressed the Number keys.

TV BRAND NAME

BRAND CODE

JVC

01

MAGNAVOX

02

MITSUBISHI

03

PANASONIC

04, 11

RCA

05

SHARP

06

SONY

07

TOSHIBA

08

ZENITH

09

HITACHI

10

SAMSUNG

12

SANYO

13

SEARS

13

 

 

10