Recording and viewing the same TV program
NOTES:
•If the erase prevention tab is removed, the tape will eject when both the REC and PLAY are pressed for recording.
•If you wish to watch the DVD playback during the normal recording on VCR, press DVD to change to DVD mode and perform the DVD playback (see page 37).
Preparation:
•Turn ON the TV and set it to the video input mode.
•Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light.)
1 Load a cassette tape with the erase prevention tab intact.
The VCR will automatically turn on.
2 Press SP/EP to select the desired tape |
|
speed SP or EP. |
|
The tape counter and “SP” or “EP” will |
|
appear on the screen for about 4 |
|
seconds. | 00 : 00 : 00 SP |
3 Set19).the TV/CATV option to the appropriate position (see page
TV - VHF/UHF channels CATV - CABLE TV channels
4 Press Number keys or VCR CH
TV mode direct channel selection -
All channels can be instantly selected by using two
buttons. (for example, to select channel 2, press “0”, then “2”. If you press only “2”, channel selection will be delayed for two seconds.) For channels 10 and above, press the 2 digits in order.
CATV mode direct channel selection -
Press 0 twice and then | |||
| select 2, Press “002”. |
| |
Press 0 first and then the remaining 2 digits in order | |||
| from left to right. |
| |
| Example: Press 012 for “12”. | CH 110 | |
Press 2 digits in order. | |||
| |||
| Example: Press 22 for “22”. |
| |
Press the 3 digits in order. |
| ||
| Example: Press 110 for “110”. |
| |
VHF/UHF/CATV CHANNELS
TV | CATV | ||
VHF | VHF | ||
UHF | STD/HRC/IRC | ||
| (A) (W) | ||
| |||
| (AAA) (ZZZ) | ||
|
| (86) (94) | |
| |||
|
| (100)(125) | |
| 01 | (5A) | |
On the VCR, press REC. |
|
5 Or on the Remote, while holding REC, | CH 110 |
press PLAY. |
|
“ ” will appear on the screen for |
|
about 4 seconds and “REC” will | INDEX |
| |
appear on the display. |
|
28