This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/ VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press VCR to select the VCR mode. (The VCR indicator will light.)
TV/CATV Selection
1 Press SET UP MENU. The VCR menu screen will appear. | ||||||
Press | or | to select “CH SETUP”, then press ENTER. | ||||
2 Press | or | to select the “TV/ | CH SETUP | |||
CATV” option. |
|
|
| TV CATV | ||
|
|
|
|
|
| |
|
|
|
|
|
| AUTO CH MEMORY |
|
|
|
|
|
| |
|
|
|
|
|
| ADD/DELETE |
|
|
|
|
|
| |
|
|
|
|
| ||
3 Then press ENTER to select the | CH SETUP | |||||
TV or CATV mode. The arrow |
| TV CATV | ||||
indicates the selected mode. |
| |||||
| AUTO CH MEMORY | |||||
| ||||||
| ||||||
|
|
|
|
|
| ADD/DELETE |
|
|
|
|
|
| |
| TV | - VHF/UHF channels |
|
|
| |
| CATV - CABLE TV channels |
| ||||
|
|
|
| |||
|
|
| ||||
4 Press SET UP MENU until the menu screen is cleared. | ||||||
Setting channels automatically
The VCR can receive a maximum of 181 channels by presetting the channels into memory.
NOTE:
You can not select “CH SETUP” if you set the channel to “L”.
1
2
Repeat above step 1 and press 
or 
to select “AUTO CH
MEMORY”.
Then press ENTER.
The auto tuning will start. The channel display will count up and when finished, the screen returns to normal.
CH SETUP
TV
CATV
AUTO CH MEMORY
ADD/DELETE
CH 002
19