Temporary disabling of rating level by DVD disc

Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not.

Preparation:

• Turn ON the TV and set to the video input mode.

• Make sure TV/VCR/DVD switch has been slided to VCR/DVD. Then press DVD to select the DVD mode. (The DVD indicator will light.)

1 Load a DVD disc and press OPEN/CLOSE or PLAY (see page 37).

2 If the DVD disc has been designed to temporarily cancel the Rating level, the screen which follows the “Reading” screen will change, depending on which disc is played. If you select “YES” with ENTER key, “Your disc exceeds the parental control level 1.”(e.g.) screen will then appear.

Reading

Your disc exceeds

 

the parental control level 1.

 

 

 

 

Parental Control Level

 

Cancel Picture

 

/Enter/Return

3 If you wish to cancel the set rating level temporarily, select

“Parental Control Level” with or , then press ENTER. If the 4-digits password at step 3 on page 50 has been set, the password entering screen will appear as shown in step 4 below. Alternatively, if the password has not been set, playback will commence. If you don’t know (or have forgotten) the password, select “Cancel Picture”.

The setting screen will disappear. Press OPEN/CLOSE to remove the disc.

4 Enter the password with Number buttons (0-9). Then press ENTER.

If you interrupt the entering, press RETURN.

Please enter the

4digit password

Enter/0 9/Cancel/Return

NOTE:

This temporary cancellation of rating level will be kept until the disc is ejected. When the disc is ejected, the original rating level will be set again automatically.

5 Playback will commence if the entered password was correct.

51