EN 15

S-VIDEO

Connection

Antenna or Cable

 

 

Coaxial cable

 

 

Flat feeder

 

 

Matching transformer

 

(not supplied)

AC outlet

S VIDEO OUTPUT

AUDIO OUTPUT

 

 

AC power cord

Back of unit

 

VHF/UHF

 

 

 

 

IN

S-Video cable

Audio cable

VHF/UHF

(supplied)

(not supplied)

 

 

OUT

 

 

RF cable

 

 

(supplied)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To S-VIDEO input

 

 

 

 

To 75 ohm

connector

 

 

 

 

Terminal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV

8To connect to a TV with S-VIDEO/AUDIO input connectors . . .A Connect the unit to TV.

AConnect the antenna, unit and TV as per “RF Connection”. ( pg. 14)

BConnect an optional audio cable between the AUDIO OUTPUT connectors on the rear panel of the unit and the TV’s audio input connectors.

CConnect the unit’s S VIDEO OUTPUT connector to the TV’s S-VIDEO input connector.

B Connect the unit to power source.

Plug the end of the AC power cord into an AC outlet. This unit performs Plug & Play Set automatically. ( pg. 17)

The clock and tuner channels will automatically be set when the antenna is connected and when the AC power cord is first connected to an AC outlet. (If “AUTO” and the channel indicator are displayed on the front display panel before the unit is powered on, the clock and tuner channels are being set automatically. Wait for the time to be displayed on the front display panel before turning on the unit.)

C Set the VCR channel to off.

Before performing the following steps:

Make sure there is no cassette inserted in the unit.

Make sure the unit is turned on, then press VCR/ DVD on the unit or VCR on the Remote so that the VCR indicator lights up.

APress POWER (1) to turn off the unit, then press STOP (8) on the unit for more than 5 seconds. “3 CH” appears on the front display panel.

BPress CH +/– on the Remote to select “– CH” (off), then press OK.

NOTES:

You can obtain high-quality S-VHS pictures.

If your TV is not stereo-capable, use the unit’s AUDIO OUTPUT (DVD/VCR) connectors to connect to an audio amplifier for Hi-Fi stereo sound reproduction.

To operate the unit with your TV using the S-VIDEO connection, set your TV to its AV mode. You can also use the

TV/VCR button on the unit’s Remote to set your TV to the AV mode. ( pg. 73)

For switching the TV’s mode, refer to the instruction manual of your television.