74 EN

REMOTE (cont.)

Connecting To A Dolby Digital Decoder or An Amplifier With A Built-in DTS

(DVD deck only)

These instructions enable you to connect your unit to dolby digital decoder or amplifier with a built-in DTS.

DIGITAL AUDIO OUT

Back of unit
To DIGITAL AUDIO input

Dolby Digital decoder or amplifier with a built-in DTS

Optical cable (not supplied)

Note for connection:

Remove the connector cover from the unit and remove the protection cap from the cable.

Make connections.

Connect the optical cable between the unit and the Dolby Digital decoder or amplifier with a built-in DTS.

NOTES:

●For Dolby digital“DIGITALsound,AUDIO OUTPUT”set to “DOLBY DIGITAL/PCM”. ( pg. 81)

●For DTS sound,“DIGITALsetAUDIO OUTPUT” to “STREAM/ PCM”. ( pg. 81)

CAUTIONS:

●This unit has a dynamic range of more to its Hi-Fi audio capability. It is r the maximum level if you are going to signals through a stereo amplifier. A level to the speakers may damage them

●Some speakers and televisions are spe prevent television interference. If b type, do not place the speakers adjac can adversely affect the video playba