EDITING (DVD DECK)

EN 71

Digital Audio Dubbing
You can dub selected audio from the DVD or Audio CD disc to a MD etc.

However, it is not possible to dub the copy-protected disc.

Example: Dubbing to a MD

A Make connections.

Connect the optical cable between the unit and the

●Turn on the TV and select the VCRdigital audiochanneldevice. (or AV mode).

● SlideTV/VCR/DVDthe

switch to the right.

B Place a disc and load a MD.

 

 

 

 

 

 

For the DVD deck

Recorder

A PressOPEN/CLOSE (x) on the DVD dec

 

Digital audio device (MD deck etc.)

Optical cable (not supplied)

disc tray.

B Place the disc in the disc tr C PressOPEN/CLOSE (x) on the DVD dec

disc tray.

For the digital audio deviceInsert a MD.

C Prepare the DVD deck for dubbing.

A PressDVD and select the audio to be dubbed.

B Search for the point where you

by pressingPLAY (4),FF (5) REWor(3) then pressSTOP (8).

Player

C PressREW (3) a little,PLAY (4)thento stp

 

Rear of unitDIGITAL AUDIO OUT

Note for connection: Remove the connector cover from the unit and remove the protection cap from the cable.

playback.

D PressPAUSE (9) to pause playbac

start point.

D Prepare the audio device for dubbing.

Select the input mode.

E Start dubbing.

A PressPLAY (4) to start playback B Start recording on the audio

F End dubbing.

Stop recording on the audio device. Then press

STOP (8)

to stop playback on the DV

NOTES:

●There may be a discrepancy of several you intend editing to start, and wher

●You can also dub a Video“DIGITALCD orAUDIOSVCD. S OUTPUT” to “PCM ONLY”. ( pg. 81)