EN 47

VFP function— Adjusting the picture quality

The VFP (Video Fine Processor) function enables you to adjust the picture character according to the type of programing, picture tone or personal preference.

NOTE:

Before you start operation;

The VFP setting screen disappears if no operations are done for more than about 10 seconds. If the setting screen disappears before you finish, start from step 1 again.

1Access the VFP setting menu.
4Select the parameter.

Press rt repeatedly to select a parameter you want to adjust, then press OK.

●Adjust gradually and confirm picture appearance results are as preferred.

GAMMA

Controls brightness of neutral tints while

(–4 to +4):

maintaining brightness of dark and bright

 

portions.

BRIGHTNESS

Controls screen brightness.

(–16 to +16):

 

CONTRAST

Controls screen contrast.

(–16 to +16):

 

SATURATION

Controls screen color depth.

(–16 to +16):

 

TINT

Controls screen tint.

Press DVD PICTURE during playback.

●The current setting appears on the TV screen.

NORMAL

GAMMA +0

BRIGHTNESS +0

CONTRAST +0

SATURATION +0

TINT+0

SHARPNESS +3

Y DELAY +0

(–16 to +16):

 

SHARPNESS

Controls screen sharpness.

(+0 to +3):

 

Y DELAY

Controls screen color gap.

(–2 to +2):

 

2Select the VFP mode.

Press w e repeatedly.

●Each time you press w e, the VFP mode changes as follows:

NORMAL]CINEMA]USER 1]USER 2](Back to the beginning)

NORMAL: Select this normally.

CINEMA: Suitable for movie.

USER 1/ You can adjust parameters that affect picture

USER 2: appearance and store settings. Go to step 3.

NOTE:

You cannot adjust the parameters of “NORMAL” and “CINEMA”.

To adjust picture appearance manually

 

 

 

3 Access USER menu.

 

 

 

Press w e repeatedly to

 

 

 

 

 

 

 

 

select “USER 1” or “USER 2”.

USER 1

 

 

 

 

GAMMA

+0

 

 

 

BRIGHTNESS +0

 

 

CONTRAST

+0

 

SATURATION +0

TINT+0

SHARPNESS +3

Y DELAY +0

●VFP menu disappears and the following pop-up window appears on the TV screen.

GAMMA +0

GAMMA +0

5Adjust the parameter.

Press rt repeatedly to change the setting, then press

OK.

●The current VFP settings appear again.

6Adjust the other parameters.

Repeat steps 4 and 5 to adjust other parameters.

To return to the normal screenPress DVD PICTURE.To activate your setting

Press DVD PICTURE, then press w erepeatedly to select “USER 1” or “USER 2” that you have changed the parameters.