JVC HR-XVS44U 88 EN, TIMER RECORDING (VCR deck), TROUBLESHOOTING (cont.), that, again, incorrectly, TIMER and confirm, Timer recording won ’t work

88 EN			TROUBLESHOOTING (cont.)
TIMER RECORDING (VCR deck)
	SYMPTOM	POSSIBLE CAUSE	CORRECTIVE ACTION
1.	Timer recording won ’t work.	● The clock and/or the timRe-rperformhave beenthesetclock and/or
		incorrectly.	settings.
		● The timer is not engaged. TIMER and confirmPressthat“#” is
			displayed on the front display panel.
2.	Timer programing is not possible.	● Timer recording is in progress.		’t be performedTimer progra
			while a timer recording is in progress.
			Wait until it finishes.
3.	“#” on the front display panel won’t	● The timer is engaged’s no	butLoadtherea cassette with the record safety tab
	stop blinking.	cassette loaded.	intact.

4.“#”, “” and “$” on the front ● The loaded cassette hasRemovehad itstherecordcassette and cov

display panel won’t stop blinking.	safety tab removed.	with adhesive tape, or inse
		with the record safety tab
	● The end of the tape wasThereachedprogramduringmay not have be
	timer recording.	in its entirety. Next time
		have enough time on the tap
		the entire program.
5.“#” blinks for 10 seconds and the	● TIMER has been pressed when there are	Check the programed data and re-
Timer mode is disengaged.	no programs in memory, or the timer	program as necessary, then pressTIMER
	record information has been programed	again.
	incorrectly.

6.“” and “$” on the front display ● The end of the tape wasThereachedprogramduringmay not have be

panel won’t stop blinking.Instant Timer Recordingin. its entirety. Next time

have enough time on the tap the entire program.

7.“N”, “” and “$” on the front display ● The loaded cassette hasRemovehad itstherecordcassette and cov

panel won’t stop blinking.safety tab removed. with adhesive tape, or inse with the record safety tab

●The end of the tape wasThereachedprogramduringmay not have be Satellite Auto Recording. its entirety. Next time

have enough time on the tap the entire program.