EN 81

Picture Settings

*The default setting is bold in the table below.

8 MONITOR TYPE

You can select the monitor type depending the TV used when you play back

 

16:9 NORMAL

DVD VIDEO discs recorded for wide-screen TVs. For more details, refer to

 

16:9 AUTO

“Monitor Set (DVD deck)” ( pg. 18)

 

4:3 LB

 

 

 

4:3 PS

 

 

 

 

 

 

8 PICTURE SOURCE

You can obtain optimal picture quality by selecting whether the content on the

 

VIDEO (NORMAL)

disc is processed by field (video source) or by frame (film source).

 

VIDEO (ACTIVE)

Normally set to

“AUTO”.

 

FILM

VIDEO (NORMAL):

 

AUTO

 

Suitable for playing back a video source disc with relatively a

 

 

 

few moments.

 

 

VIDEO (ACTIVE):

 

 

 

Suitable for playing back a video source disc with relatively a

 

 

FILM:

lot of movements.

 

 

Suitable for playing back a film or progressive source disc.

 

 

AUTO:

Used to play back a disc containing both video and film

 

 

 

source materials. This unit recognizes the picture type (film or

 

 

 

video source) of the current disc according to the disc

 

 

 

information.

 

 

● If the playback picture is unclear or noisy, o

 

are rough, try to change to other modes.

 

 

 

8 SCREEN SAVER

The TV screen may be burned out if a static picture is displayed for a long time.

ON

When this function is set to “ON”, the unit automatically activates the screen

OFF

saver function if a static picture, such as an on-screen display or menu is

 

displayed for over 5 minutes.

 

NOTE:

 

 

 

This function is not available for Audio CDs and MP3/WMA discs.

 

 

 

8 MP3&WMA/JPEG

You can select files to play back, when both MP3/WMA files and JPEG files are

MP3&WMA

recorded on a disc.

JPEG

MP3&WMA:

Select this to play back MP3/WMA files.

 

JPEG:

Select this to play back JPEG files.

 

NOTE:

 

 

 

You cannot access the DVD Set Up screen“X” appearsand on the TV screen if a disc is

 

already placed.

 

 

 

 

 

 

Audio Settings

*The default setting is bold in the table below.

8 DIGITAL AUDIO OUTPUT

Set to the appropriate mode according to the type of the device connected to

PCM ONLY

DIGITAL AUDIO OUT connector on the rear of unit.

 

DOLBY DIGITAL/PCM

It is not necessary to set this mode when you connect no device to DIGITAL

STREAM/PCM

AUDIO OUTconnector.

 

 

PCM ONLY:

 

 

Select this when you connect the unit

’s DIGITAL AUDIO OUT

 

connector to the linear PCM digital input connector of other audio

 

device.

 

 

DOLBY DIGITAL/PCM:

 

 

Select this when you connect the unit

’s DIGITAL AUDIO OUT

 

connector to the digital input connector of a Dolby Digital decoder

 

or an amplifier with a built-in Dolby Digital decoder.

 

STREAM/PCM:

 

 

Select this when you connect the unit

’s DIGITAL AUDIO OUT

 

connector to the digital input connector of an amplifier with a built-

 

in DTS, Dolby Digital, or MPEG multichannel decoder.