JVC HR-XVS44U 8 SUPERIMPOSE, 8 AUTO SP]EP TIMER, 8 VIDEO STABILIZER, 8 BLUE BACK, For Example:, bold in the table below, When this function is set to

			EN 77
		* The default setting isbold in the table below.
8 SUPERIMPOSE	When this function is set to “ON”, various operational indicators appear on the
ON	TV screen. Messages appear in the selected language. ( pg. 20)
OFF	NOTES:
	● When you use this unit as the source “SUPERIMPOSE”player for edi
	to “OFF” before starting.
	● During playback, the operation mode indicators may
	type of tape being used.
8 AUTO SP]EP TIMER	When this function is set to “ON”, the unit automatically switches to EP mode
ON	to allow complete recording if there is not enough tape to record the entire
OFF	program while timer-recording in SP mode.
	For Example:
	Recording a program of 140 minutes in length onto a 120-minute tape
	Approximately 110 minutes	Approximately 30 minutes
	SP mode	EP mode
	Total 140	minutes
	Make sure you set this function to“ON”, before the timer-recording starts.

NOTES:

●If you have programed the unit to timer-record 2 or program and those thereafter may “AUTOnot fitSP]EPon TIMERthe” tap to “ON”. In this case, make sure the mode is not engaged, then set the tape speed

manually during timer programing.

●In order to ensure that the recording fits on the t recorded section at the end of the tape.

●There may be some noise and sound disturbance at the switches from SP to EP mode.

●The Auto]EPSP Timer feature is not available and the feature will not work properly o T(ST)-90, and T(ST)-120

8 VIDEO STABILIZER	When this function is set to “ON”, you can automatically correct vertical
ON	vibration in the picture when playing back unstable recordings made on
OFF	another recorder.

	NOTES:
	● When you finish viewing a tape, be“OFF”sure.	to set this
	● Regardless of the setting, this function has no eff
	effects playback.
	● The on-screen display may jitter vertically“ON”.		when th
	● To watch recordings with close-caption,“OFF”.	set this fu
8 BLUE BACK	When this function is set to “ON”, the TV screen becomes all blue when
ON	receiving a channel not in use.
OFF	NOTE:
	When you want to receive an unstable channel with poor signals, set this
	“OFF”.