EN 29

Playback Features

●Turn on the TV and select the VCR channel (or AV mode).

●Slide the TV/VCR/DVD switch to the right.

Still Picture/Frame-By-Frame Playback1Pause during playback.

Press PAUSE (9).

●If there is vertical jitter, press CH +/– on the Remote to correct the picture.

2Activate frame-by-frame playback.

Press PAUSE (9) to advance a still picture.

Slow Motion

1Pause during playback.

Press PAUSE (9).

2Activate slow motion playback.

Press and hold PAUSE (9) for 2 seconds, then release. Press PAUSE (9) and release again to return to still picture.

●The speed changes for each direction by pressing REW (3) and FF (5) repeatedly.

NOTE:

During slow motion playback, some noise may appear on the TV screen. Press CH + or – on the Remote to eliminate the noises.

Variable Speed Search

During playback, press FF (5) for forward variable speed search, or REW (3) for reverse variable speed search.

●The speed changes for each direction by pressing REW (3) and FF (5) repeatedly.

When pressing FF (5): (SP): +5x{+7x

(EP): +11x{+21x

When pressing REW (3):

Once REW (3) is pressed, reverse search starts in –1x normal playback speed. After this process, each press of REW (3) changes the search speed between –5x and –7x in SP mode, –11x and –21x in EP mode.

(SP): –1x]–5x{–7x

(EP): –1x]–11x{–21x

ATTENTION

To resume normal playback, press PLAY (4).

In the search, still, slow-motion or frame-by-frame playback mode,

●the picture will be distorted.

●the noise bars will appear.

●there may be a loss of colour.

●you cannot hear the sound.