JVC HRS6960E 10 EN, Check the contents, Situate the recorder, Connect the recorder to TV

10 EN INSTALLING YOUR NEW RECORDER

Basic Connections

Aerial connector

Back of TV

21-pin SCART	TV aerial
connector	cable
21-pin SCART
cable	RF cable
(not provided)
	(provided)

Mains power cord ANT. IN

Back of recorder

AV1 (L-1) IN/OUT RF OUT

Mains outlet

Make AV connection if your TV has a 21-pin AV input connector (SCART) in order to reduce the possibility of interference. With AV connection, you can enjoy stereo playback of video tapes if you are using a stereo TV.

NOTES:

●The AV1 (L-1) IN/OUT connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). If your TV’s 21-pin AV input connector (SCART) is compatible with the Y/C signal, set

“L-1 OUTPUT” to “S-VIDEO” after the connection and the initial settings are completed ( pg. 41). You can obtain high-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

●Set your TV to the VIDEO (or AV), Y/C, or RGB mode according to the type of your TV’s SCART connector.

●For switching the TV’s mode, refer to the instruction manual of your television.

It’s essential that your video recorder be properly connected.

THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.

A Check the contents.

Make sure the package contains all of the accessories listed in “SPECIFICATIONS” on page 65.

B Situate the recorder.

Place the recorder on a stable, horizontal surface.

C Connect the recorder to TV.

The connection method you use depends on the type of TV you have.

RF Connection

8To connect to a TV with NO AV input connectors . . .

ADisconnect the TV aerial cable from the TV.

BConnect the TV aerial cable to the ANT. IN connector

on the rear panel of the recorder.

CConnect the provided RF cable between the RF OUT connector on the rear panel of the recorder and the TV’s aerial connector.

AV Connection

8To connect to a TV with AV input connectors . . .

AConnect the aerial, recorder and TV as per “RF

Connection”.

BConnect an optional 21-pin SCART cable between the AV1 (L-1) IN/OUT connector on the rear panel of the recorder and the TV’s 21-pin SCART connector.

D Connect the recorder to mains.

Plug the end of the mains power cord into a mains outlet.

After the connection is completed, perform “Auto Set Up” on page 11.