24 EN | RECORDING (cont.) |
Recording Features
Record One Programme While Watching Another
If your recorder is connected to the TV via the AV connection, press TV/VCR. The recorder’s VCR indicator and the TV broadcast being recorded disappear. Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.
●The programme selected with the TV’s channel controls appears on the TV screen, while the one selected with the recorder’s PR buttons is recorded on the tape.
●If a decoder is connected to the recorder ( pg. 45), you can select a scrambled channel as well with the TV channel controls.
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours (selectable in
1Start recording.
Press 7 on the recorder.
2Engage the ITR mode.
Press 7 again. ““ blinks and “0:30” appears on the front display panel.
3Set the recording duration.
If you want to record for more than 30 minutes, press 7 to extend the time. Each press extends recording time by 30 minutes.
NOTE:
You can only perform ITR using the 7 button on the recorder’s front panel.
Elapsed Recording Time Indication
1Set the counter display.
Press –
●The front display panel shows
the counter reading with “:” lit.
2Reset the counter.
Press 0000 before starting recording or playback.
●The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs. You can check the exact time of a recording or playback.
Tape Remaining Time
Press – –:– – until the time remaining on the tape appears.
●The front display panel shows
the tape remaining time with “:” blinking.
● By pressing the –
show the channel position*, clock time, counter reading or tape remaining time.
* Channel position is not displayed during playback.
NOTE:
Depending on the type of tape being used, the tape remaining time reading may not appear right away, or is not correct.
“–
