44 EN, Perfect Connections | JVC HRS6960E guide

44 EN

SYSTEM CONNECTIONS (cont.)

Perfect Connections

This is an example of recommended connection if your TV has two 21-pin AV input (SCART) connectors.

Connect the decoder to the satellite receiver’s connector if you have a decoder, AV1 (L-1) IN/OUT connector to TV’s connector, and AV2 (L-2) IN/DECODER connector to the satellite receiver’s connector. Then connect the satellite receiver and TV.

NOTES:

●Set “L-2 SELECT” to “A/V” ( pg. 42).

●You can use Automatic Satellite Programme Recording function ( pg. 34) with this connection.

●To record a programme via the satellite receiver, select L-2 mode by pressing AUX (number key “0”) and/or PR so that “L-2” appears on the front display panel.

●To receive a scrambled broadcast, descramble the signal with the decoder connected to the satellite receiver.

●For details, refer to the instruction manual of the satellite receiver and decoder.

Outdoor unit

Satellite cable

Satellite receiver

Decoder

Back of recorder

Mains outlet

	21-pin SCART	Aerial
Aerial	connector	connector
		Back of TV
	TV aerial cable

ANT. IN

RF OUT

Image 44

JVC HRS6960E specifications 44 EN, Perfect Connections

Contents

Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Tape Speed SP/LP/EP pg Counter can display up to +/ 195959. IfPlayback or recording time exceeds this limit ON-SCREEN Display Remote Control How To Use Operating JVC TVs Check the contents 10 ENSituate the recorder Connect the recorder to TV Auto Set Up Turn on the recorderSelect your country Before starting, make sure of the following Perform Auto Set Up 12 ENSelect the language Confirm/Set video channel Perform Preset Download Set the video channelPress rt to select CH - and press OK or e Set the video channel to off manually. pg Just Clock 14 ENLanguage for the on-screen display Access the Main Menu screen Access the Country Set screenLanguage Return to the normal screen Installing Satellite Controller 16 ENSituate the Satellite Controller Attach the Satellite Controller Setting satellite receivers brand and channel Access the Sat Control Set screenSelect the satellite receiver’s channel for testing Turn on the satellite receiver TV Auto Power On 18 ENNextView Link VCR Auto Standby Direct Rec Basic Playback 20 EN Slow MotionPicture Search Pause during playback Variable Speed Search Index SearchSkip Search Instant Review 22 EN Next Function MemoryRepeat Playback Manual Tracking Recording Resume Function Choose a programmeSet the tape speed Start recording Tape Remaining Time Instant Timer Recording ITR24 EN Receiving Stereo and Bilingual Programmes Engage the S-VHS ET modeSuper VHS ET S-VHS ET Recording 26 ENPlayback Access the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming Enter the Showview number Set the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode 28 EN Express Timer Programming Access the Programme screenEnter the programme start time Enter the programme stop time To Timer-Record Weekly Or Daily Serials 30 ENVPS/PDC Recording Enter the channel position Set the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming Disengage the timer mode Cancel or change a programmeReturn to the timer mode 32 EN Cancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screen Select the L-2 Select mode Recording modeProgramme Recording 34 EN When inserting a cassette with the record safety tab Intact Navigation 36 EN Navigation PlaybackProgramme Navigation Screen Load a recorded cassette Edit Programme Title Select the programme 38 EN Entering CharacterDelete Tape Data Delete the tape data Edit From a Camcorder Another 40 EN Output and L-1 Input Setting Output/Input Set B Access the Output/Input Set screen Decoder connector 42 EN Connecting To a Satellite Receiver Simple Connections 44 EN Perfect Connections Select the input mode Connect the decoderSet the tuner Set L-2 Select to DECODER. pg 46 EN Make connections Mode Set Access the Mode Set screenSelect the mode Select the mode setting 48 EN For Example On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode 50 EN Colour System Access the Auto Channel Set screen Tuner Set52 EN Auto Channel Set Press OK twice Perform Auto Channel SetView the Confirmation screen 54 EN Manual Channel Set When Receiving a Scrambled Broadcast Delete a Channel Set Stations B 56 ENSet Stations a TV Station And ID List Station Name 58 EN Access the Clock Set screenClock Set Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operation Access the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 60 EN Power 62 EN Recording Other Problems 64 EN Playback Signal-to-noise ratio 45 dB Horizontal resolution Memory backup time Approx minScan system Lines VHS 66 EN Memo