14 EN

INITIAL SETTINGS (cont.)

Results of Auto Set Up/Preset Download appear on the front display panel

If both Auto Channel Set and Auto Clock Set have been performed successfully, the correct current time is displayed.

Turn on the TV and select its video channel or AV mode, then make sure that all necessary stations have been stored in the recorder’s memory by using the PR button(s).

If station names (ID –  pg. 57) have also been stored in the recorder’s memory, the station name will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is tuned to a different station.

If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 54 – 57.

If Auto Channel Set has succeeded but Auto Clock Set has not, “1” (channel position) is displayed.

ATurn on the TV and select its video channel or AV mode, then make sure that all necessary stations have been stored in the recorder’s memory by using the PR button(s).

If station names (ID –  pg. 57) have also been stored in the recorder’s memory, the station name will be displayed at the top left corner of the TV screen for about 5 seconds when the recorder is tuned to a different station.

If you want to set the tuner manually such as to add or skip channels, to change channel positions, or to set or change station names, see pages 54 – 57.

BPerform “Clock Set” on page 58.

If both Auto Channel Set and Auto Clock Set have failed, “– –:– –” is displayed.

Make sure the cables are connected properly and turn off the recorder’s power once, then turn the recorder’s power back on again.

The Country Set display appears on the TV screen; perform “Auto Set Up” on page 11 or “Preset Download” on page 13 again.

IMPORTANT

To check if the Guide Program numbers have been set correctly, perform the SHOWVIEW Timer Programming ( pg. 27).

In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the SHOWVIEW

system, the recorder will record a TV programme of a different station. When programming the timer using the SHOWVIEW system, be sure to check the desired channel is selected correctly ( pg. 27, “SHOWVIEW ® Timer Programming”).

Your video recorder memorizes all detected stations even if reception of some of them is poor. You can delete those stations with an unacceptable picture ( pg. 55, “Delete A Channel”).

INFORMATION

Language for the on-screen display

Auto Set Up also selects the language automatically for the on-screen display depending on the Country setting you have made in step 2 on page 11 (unless you have selected BELGIUM or SUISSE), as shown below.

SUOMI

]

SUOMI

DANMARK

]

DANSK

NEDERLAND

]

PORTUGAL

]

ENGLISH

ÖSTERREICH

]

DEUTSCH

GREECE

]

DEUTSCHLAND ]

DEUTSCH

CESKÁ REPUBLIKA ]

CEcTINA

OTHER WESTERN EUROPE]

POLSKA

]

POLSKI

ITALIA

]

ITALIANO

OTHER EASTERN EUROPE ]

NORGE

]

NORSK

MAGYARORSZÁG ]

MAGYAR

 

 

SVERIGE

]

SVENSKA

ESPAÑA

]

CASTELLANO

 

 

If you want to change the language setting manually, see “Language” on page 15.

Just Clock

NEDERLANDS ENGLISH ENGLISH ENGLISH

Your recorder is equipped with the Just Clock function which provides accurate time keeping through automatic adjustments at regular intervals, by reading data from a PDC signal. If you want to take advantage of this function, simply set it to “ON”

( pg. 58, “Just Clock”).

Page 14
Image 14
JVC HRS6960E specifications 14 EN, Language for the on-screen display, Just Clock