48 EN |
| SUBSIDIARY SETTINGS (cont.) |
|
| * The default setting is bold in the table below. |
|
| |
8 B.E.S.T. | You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) system to | |
ON | “ON” or “OFF” ( pg. 26). | |
OFF |
|
|
|
| |
8 PICTURE CONTROL | This feature helps you to adjust the playback picture quality according to | |
AUTO | your preference. Normally select “AUTO”. | |
EDIT | AUTO: | Provides the optimised picture benefits of the B.E.S.T. Picture |
SOFT | EDIT: | System. |
| Minimizes picture degradation during editing (recording and | |
| SOFT: | playback). |
| Reduces image coarseness when viewing overplayed tapes | |
|
| containing a lot of noise. |
| NOTES: |
|
| ● When you select “EDIT” or “SOFT”, the selected mode will not change until you | |
| select another mode. | |
| ● When you select “EDIT” to dub tapes, be sure to select “AUTO” after you finish | |
| dubbing the tapes. | |
| ● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically from | |
| “AUTO” to “NORM”. | |
|
| |
8 AUTO TIMER | When this function is set to “ON”, the timer is automatically engaged when | |
ON | the recorder power is turned off, and automatically disengaged when the | |
OFF | recorder is powered back on. | |
| NOTE: |
|
| For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions are | |
| disabled while the Timer mode is engaged. To disengage the timer, press # (TIMER). | |
|
| |
8 O.S.D. | When this function is set to “ON”, various operational indicators appear on | |
ON | the TV screen. Messages appear in the selected language ( pg. 14, 15). | |
OFF | NOTES: |
|
|
| |
| ● When you use this recorder as the source player for editing, be sure to set “O.S.D.” | |
| to “OFF” before starting. | |
| ● During playback, the operation mode indicators may be disturbed depending on the | |
| type of tape being used. | |
|
| |
8 PROG. NAVIGATION | When this function is set to “ON”, the recorder stores information on the | |
ON | recorded programmes. If you do not want to use the Programme Navigation | |
OFF | function ( pg. 35), set “PROG. NAVIGATION” to “OFF”. | |
| NOTES: |
|
| ● Programme Navigation is possible with the cassettes recorded with this recorder | |
| only. |
|
| ● Before recording, make sure the recorder’s clock is set correctly. | |
| ● To record the programme information in this recorder’s memory, you must continue | |
| to record each programme for over the minimum recording time; 8 minutes for the | |
| SP mode, 15 minutes for the LP mode or 23 minutes for the EP mode. | |
| ● Programme Navigation may not work properly depending on the tape being used. | |
| ● The programme information is stored in this recorder’s memory. If the memory in this | |
| recorder should ever be damaged and the programme information lost, it is | |
| impossible to restore that information. | |
|
|
|