20 EN, Slow Motion, Picture Search | JVC HRS6960E manual

20 EN

PLAYBACK (cont.)

Playback Features

NOTES:

●For speed search, refer to the table below.

●You can see smooth slow motion picture only during 1/2x slow motion playback.

●You can hear the normal audio track only during 1.5x speed search.

Reverse						Forward


Reverse		Reverse	Reverse	Slow	Normal	Forward
	search	play	slow	motion	play	search
			motion
–7, –5, –3		–1	–1/6	1/6, 1/2*	1	1.5*,2, 3, 5, 7

* PAL SP/LP only

Still Picture/Frame-By-Frame Playback

1Pause during playback.

Push the JOG dial.

OR

Press 9.

2Activate frame-by-frame playback.

Turn the JOG dial to the right for forward frame-by-frame playback, or to the left for reverse frame-by-frame playback.

OR

Press 9.

OR

Press w or e.

To resume normal playback, press 4.

Slow Motion

During playback, turn the JOG dial one click to the left for forward slow motion. To play in reverse slow motion, continue to turn the JOG dial to the left after selecting all the forward direction slow motion modes.

OR

During still picture, press and hold 9 for 2 seconds, then release. Press 9 and release again to return to still picture.

OR

During still picture, press and hold w or e. Release to return to still picture.

NOTE:

During slow motion playback, some noise may appear on the TV screen. Press PR + or – on the remote control to eliminate the noises.

Picture Search

Press 3 or 5. Press 3 or 5 again to perform high-speed search.

NOTE:

Each time you press 3 or 5, the search speed changes between low-speed and high-speed.

To resume normal playback, press 4.

ATTENTION

●Picture may not appear during picture search with an LP/ EP-recorded tape.

●Noise may appear or the picture may appear distorted with an EP-recorded tape during still, slow motion, frame-by-frame playback or variable speed search.

●In the picture search, still, slow motion or frame-by-frame playback mode, the picture will be distorted, and there will be a loss of colour.

Image 20

JVC HRS6960E specifications 20 EN, Slow Motion, Picture Search, Pause during playback, Activate frame-by-frame playback

Contents

Video Cassette Recorder Safety Precautions Moisture Condensation Front View Rear View Tape Speed SP/LP/EP pg Counter can display up to +/ 195959. IfPlayback or recording time exceeds this limit ON-SCREEN Display Remote Control How To Use Operating JVC TVs Check the contents 10 ENSituate the recorder Connect the recorder to TV Auto Set Up Turn on the recorderSelect your country Before starting, make sure of the following Perform Auto Set Up 12 ENSelect the language Confirm/Set video channel Perform Preset Download Set the video channelPress rt to select CH - and press OK or e Set the video channel to off manually. pg Just Clock 14 ENLanguage for the on-screen display Access the Main Menu screen Access the Country Set screenLanguage Return to the normal screen Installing Satellite Controller 16 ENSituate the Satellite Controller Attach the Satellite Controller Setting satellite receivers brand and channel Access the Sat Control Set screenSelect the satellite receiver’s channel for testing Turn on the satellite receiver TV Auto Power On 18 ENNextView Link VCR Auto Standby Direct Rec Basic Playback 20 EN Slow MotionPicture Search Pause during playback Variable Speed Search Index SearchSkip Search Instant Review 22 EN Next Function MemoryRepeat Playback Manual Tracking Recording Resume Function Choose a programmeSet the tape speed Start recording Tape Remaining Time Instant Timer Recording ITR24 EN Receiving Stereo and Bilingual Programmes Engage the S-VHS ET modeSuper VHS ET S-VHS ET Recording 26 ENPlayback Access the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming Enter the Showview number Set the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode 28 EN Express Timer Programming Access the Programme screenEnter the programme start time Enter the programme stop time To Timer-Record Weekly Or Daily Serials 30 ENVPS/PDC Recording Enter the channel position Set the programme start/stop time and channel Enter the programme modeBefore performing the 24 Hour Express Timer Programming Disengage the timer mode Cancel or change a programmeReturn to the timer mode 32 EN Cancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screen Select the L-2 Select mode Recording modeProgramme Recording 34 EN When inserting a cassette with the record safety tab Intact Navigation 36 EN Navigation PlaybackProgramme Navigation Screen Load a recorded cassette Edit Programme Title Select the programme 38 EN Entering CharacterDelete Tape Data Delete the tape data Edit From a Camcorder Another 40 EN Output and L-1 Input Setting Output/Input Set B Access the Output/Input Set screen Decoder connector 42 EN Connecting To a Satellite Receiver Simple Connections 44 EN Perfect Connections Select the input mode Connect the decoderSet the tuner Set L-2 Select to DECODER. pg 46 EN Make connections Mode Set Access the Mode Set screenSelect the mode Select the mode setting 48 EN For Example On the remote control, or press 7 on the recorderEntire programme while timer-recording in SP mode 50 EN Colour System Access the Auto Channel Set screen Tuner Set52 EN Auto Channel Set Press OK twice Perform Auto Channel SetView the Confirmation screen 54 EN Manual Channel Set When Receiving a Scrambled Broadcast Delete a Channel Set Stations B 56 ENSet Stations a TV Station And ID List Station Name 58 EN Access the Clock Set screenClock Set Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operation Access the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 60 EN Power 62 EN Recording Other Problems 64 EN Playback Signal-to-noise ratio 45 dB Horizontal resolution Memory backup time Approx minScan system Lines VHS 66 EN Memo