Additional preparation
Connecting methods | If the device's sound output is in | |
1 Connect the TV's VIDEO jack | mono: | |
Connect the device's AUDIO OUT jack and | ||
and the device's VIDEO OUT | ||
the TV's L/MONO jack with an audio cable. | ||
(video output) jack with a video |
| |
cable. | Connecting devices to the | |
If connecting a device to the TV | ||
OUTPUT terminal | ||
with an | The signals of the images and sound you are | |
Connect the VCR's | ||
currently viewing with this TV are output | ||
output) connector and the TV's S connector | ||
through the OUTPUT terminal. By connecting | ||
with an | ||
a VCR to the OUTPUT terminal, you can | ||
connecting with a video cable. | ||
record the currently shown image and sound | ||
Note that the connection with a video cable | ||
to that VCR. To do this, connect the VCR and | ||
will be ignored in case you connect a VCR to | ||
OUTPUT terminal following the steps below. | ||
the TV with both video cable and | ||
| ||
cable. | 1 Connect the VIDEO jack in the | |
If connecting a DVD player to the | OUTPUT terminal and the VCR's | |
VIDEO IN (video input) jack with | ||
TV with a component video | ||
a video cable. | ||
cable. |
Connect three jacks (Y/VIDEO, CB and CR) in the
If connecting a device to the
Connect the TV's Y/VIDEO jack and the device's VIDEO OUT (video output) jack with a video cables.
Then set the
•In the
2Connect the TV's AUDIO jacks (L/MONO and R) and the device's AUDIO OUT (audio L/R output) jacks with an audio cable.
2Connect the AUDIO jacks (L and R) in the OUTPUT terminal and the VCR's AUDIO IN (audio L/R input) jacks with an audio cable.
•When you turn off the TV, the signals from the OUTPUT terminal are also turned off.
•The component signals input from the
Connecting Headphones
Connect the headphons with a stereo mini jack (of 3.5 mm in diameter) to the Headphone jack at the TV front panel.
32
