JVC IKD-LH2000 manual To change the FM tuner selectivity, To turn on/off the key-touch tone—Beep

To turn the tag display on or off – ID3 Tag

An MP3 file can contain file information called “ID3 Tag” where its album name, performer, track title, etc. are recorded.

There are two versions–ID3v1 (ID3 Tag version 1) and ID3v2 (ID3 Tag version 2). This unit is compatible only with ID3v1.

•On: Turns on the ID3 tag display while playing MP3 files.

*If an MP3 file does not have ID3 tags, directory name and file name appear.

Note:

If you change the setting from“Off” to “On”

while playing an MP3 file, the tag display will be activated when the next file starts playing.

•Off: Turns off the ID3 tag display while playing MP3 files. (Only the directory name and file name can be shown.)

To change the FM tuner selectivity—

IF Filter

In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard.

•Auto: When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. (But the stereo effect will also be lost.)

•Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will not be lost.

To turn on/off the key-touch tone—Beep

You can deactivate the key-touch tone if you do not want it to beep each time you press a button.

• On:	Activates the key-touch tone.
• Off:	Deactivates the key-touch tone.

To select the external component to use—

Ext Input

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component—CD changer or external component —to use.

• Changer:	To use the CD changer.
• Line In:	To use the external component other
	than CD changer.

Note:

For connecting the Line Input Adaptor KS-U57 and the

external component, refer to the Installation/Connection Manual (separate volume).

To select the telephone muting—Telephone

This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “Muting 1” or “Muting 2,” whichever mutes the sounds from this unit.

When shipped from the factory, this mode is deactivated.

•Muting 1: Selects this if this setting can mute the sounds.

•Muting 2: Selects this if this setting can mute the sounds.

• Off: Cancels the telephone muting.

ENGLISH

33