JVC IKD-LH2000 manual Selecting or adjusting your own color— User, English

6 Select the source that you want to set the display color for.

As you turn the control dial, the source

names change as follows:

9 Repeat steps 5 to 8 to select the color for each source (except when selecting “AllSource” in step 6).

10 Finish the setting.

ENGLISH

*1	CD	*2
AllSource		Changer
		(Line In)
AM		FM

*1 When you select “AllSource,” you can use the

same color for all sources.

*2 Selected only when these components are

connected.

7 Enter the color selecting mode.

8 Select the display color.

As you turn the control dial, the colors change as follows:

Every*1 OAqua OSky OSea O Leaves OGrass ORose OCherry O Orange OHoney OViolet OGrape O Snow OUser*2 O(back to the beginning)

*1 When you select “Every,” the color changes every two seconds (changing to every color listed above except “User.”)

*2 When you select “User,” one of the original colors—“Day” or “Night” can be selected depending on the “User” setting.

Selecting or adjusting your own color— User

You can adjust and store your own colors—“Day” and “Night,” and select one of them as the display color for any desired source.

• Day: Can be used as your user color during the day time (while the headlights are turned off).

•Night: Can be used as your user color during the night time (while the headlights are turned on.)

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

(See pages 30 and 31.)

2 Press 5 (up) or ° (down) repeatedly

until “Color” appears as the PSM category on the left side of the display.

CONTINUED ON THE NEXT PAGE

35