| Changing the display pattern | ||
ENGLISH | |||
|
| ||
varies according to the playback sources. | |||
| You can change the display pattern. | ||
| The number of the selectable display patterns | ||
| However, the unit basically provides three main | ||
| |||
| display patterns for each source, and once one | ||
| of these three patterns is selected, the same | ||
| pattern is used for all the sources. | ||
| Press DISP (D). | ||
|
| Each time you press the button, | |
|
| the display patterns change as | |
|
| follows: | |
EX.: When playing a CD
Large animation display
Small animation displays*
Clock time display
*Small animation displays are used for showing not only the source’s main information (illustrated on this page as examples), but also showing some other information. For details, see each related section.
Cancelling the display demonstration
When shipped from the factory, display demonstration (MovieDemo) has been activated, and starts automatically when no operations are done for about 20 seconds.
•It is recommended to cancel the demonstration before you use the unit for the first time.
To cancel the display demonstration, follow the procedure below:
1 Press and hold SEL (select) for more than 2 seconds so
that “MovieDemo”
appears on the display. (PSM: see pages 30
and 31.)
2 Select “Off.”
3 Press SEL (select) to finish the setting.
In this manual, the illustrations of the display are mainly of the large animation display (initial setting). If you have changed the display patterns or some PSM items, the actual displays you see will be different.
Note:
While playing a source, you can also show the level meter on the display. For details, see “Activating the level meter” on page 28.
To activate the display demonstration, repeat the same procedure and select “Interval” or “All Time” in step 2.
•For more details, see “To set the movie demo— MovieDemo” on page 31.
8
