JVC IKD-LH2000 manual Troubleshooting, English, Symptoms, Causes, Remedies

ENGLISH

44

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service center.

		Symptoms	Causes		Remedies
	• Sound is sometimes		You are driving on rough	Stop playback while driving on
		interrupted.	roads.	rough roads.
			Disc is scratched.	Change the disc.
			Connections are incorrect.	Check the cords and
				connections.
	•	Sound cannot be heard	The volume level is set to the	Adjust it to the optimum level.
		from the speakers.	minimum level.
			Connections are incorrect.	Check the cords and
				connections.
	•	CD cannot be played back.	Disc is inserted upside down.	Insert the disc correctly.
Playback
	• CD-R/CD-RW cannot be		CD-R/CD-RW is not finalized.	•	Insert a finalized
		played back.			CD-R/CD-RW.
	• Tracks on the CD-R/CD-			•	Finalize the CD-R/CD-RW
General		RW cannot be skipped.			with the component which
					you used for recording. (See
					page 46.)
	•	“No Disc” flashes on the	No disc in the loading slot.	Insert a disc into the loading slot.
		display .
			Disc is inserted incorrectly.	Insert the disc correctly.
	•	Disc cannot be ejected.	Disc is locked.	Unlock the disc (See page 16.)
	•	This unit does not work at	The built-in microcomputer	Press the reset button on the
		all.	may have functioned	panel holder using a ball-point
			incorrectly due to noise, etc.	pen after detaching the control
				panel. (The clock setting and
				preset stations stored in memory
				are erased.) (See page 2.)
	•	“Panel Connect Error”	The control panel is not	Remove the control panel, wipe
		appears on the display.	attached correctly and firmly.	the connectors, then attach it
				again. (See page 38.)
	•	SSM (Strong-station	Signals are too weak.	Store stations manually.
FM/AM		Sequential Memory)
		automatic preset does not
		work.
	•	Static noise while listening	The antenna is not connected	Connect the antenna firmly.
		to the radio.	firmly.