Listening to the satellite radio
Before operating, connect either one of the following (separately purchased) to the CD changer jack on the rear of this unit.
•JVC SIRIUS Satellite radio interface,
•JVC Smart Digital Adaptor, XMDJVC100, for listening to XM Satellite radio.
ENGLISH
For SIRIUS Radio
Activate your subscription after connection:
1Turn on the power.
2Select “Satellite Radio.”
The SIRIUS Satellite radio starts updating all the SIRIUS channels. (“GCI update” column below.)
•Once completed, SIRIUS Satellite radio tunes in to the preset channel, CH184.
3Check your SIRIUS ID, page 56.
4Contact SIRIUS on the internet at <http:// activate.siriusradio.com/> to activate your subscription, or you can call SIRIUS
“Subscription updated Press any Key to continue” appears on the monitor once subscription has been completed.
For XM Radio
Activate your subscription after connection:
•Only Channel 0, 1, and 247 are available before activation.
1Turn on the power.
2Select “Satellite Radio.”
The XMDirect™ Universal Tuner Box starts updating all the XM channels. “Channel 1” is tuned in automatically. (“GCI update” column below.)
3Check your XM Satellite radio ID labelled on the casing of the XMDirect™ Universal Tuner Box, or tune in to “Channel 0” (page 44).
4Contact XM Satellite radio on the internet at <http://xmradio.com/activation/> to activate your subscription, or you can call
Once completed, the unit tunes in to one of the available channels (Channel 4 or higher).
GCI (Global Control Information) update:
•If channels are updated after subscription, updating starts automatically, and no sound can be heard. For SIRIUS: “Channel is updating XX% completed” appears.
For XM: “UPDATING” appears.
•Update takes a few minutes to complete.
•Do not touch any touch pad control, press any button, or perform any operation until updating is completed.
43 | EXTERNAL DEVICES |
|