Bluetooth

iPod playback

Symptoms

Remedies/Causes

• Bluetooth device does not detect the unit.

• Search from the Bluetooth device again.

 

• Reset the unit. When “Open...” appears on the monitor,

 

search from the Bluetooth device again.

• The unit does not make pairing with the

• Enter the same PIN code for both the unit and target

Bluetooth device.

device. If the PIN code of the device is not indicated on

 

its manuals, try “0000” or “1234.”

• Phone sound quality is poor.

• Reduce the distance between the unit and the Bluetooth

 

cellular phone.

 

• Move the car to place where you can get a better signal

 

reception.

• The sound is interrupted or skipped while

• Reduce the distance between the unit and the Bluetooth

using a Bluetooth audio player.

audio player.

 

• Disconnect the device connected for Bluetooth phone.

 

• Turn off, then turn on the unit.

 

• (When the sound is not yet restored,) connect the device

 

again.

• The connected audio player cannot be

Check whether the connected audio player supports AVRCP

controlled.

(Audio/Video Remote Control Profile).

• The unit does not response when you tried to

You may have tried to copy the same entries (as stored) to

copy the phone book to the unit.

the unit. Touch BAND to exit.

• “No Audio Device” appears on the monitor.

Connect this unit and the Bluetooth audio player correctly.

• “No Voice Device” appears on the monitor.

The connected cellular phone does not have the voice

 

recognition system.

• The iPod does not turn on or does not work.

• Check the connecting cable and its connection.

 

• Charge the battery.

• The sound is distorted.

Deactivate the equalizer either on this unit or the iPod.

• “Disconnect” appears on the monitor.

Check the connecting cable and its connection.

• Playback stops.

The headphones are disconnected during playback. Restart

 

playback.

• “No Files” appears on the monitor.

No tracks are stored. Import tracks to the iPod.

• “Reset 01” – “Reset 07” appears on the

Disconnect the adapter from both this unit and iPod. Then,

monitor.

connect them again.

• “Reset 08” appears on the monitor.

Check the connection between the adapter and this unit.

• The iPod’s controls do not work after

Reset the iPod.

disconnecting from this unit.

 

• “Restricted Device” appears on the monitor.

Check whether the connected iPod is compatible with this

 

unit. (￿page 65)

• No operations are available while playing

Operate the unit after the artwork is loaded. (￿page 65)

back a track containing artwork.

 

ENGLISH

71REFERENCES

Page 71
Image 71
JVC KD-ADV49 manual Bluetooth IPod playback Symptoms Remedies/Causes