2

ENGLISH

Indication pattern changes as you adjust the level.

 

Ex.: When “TRE” is selected

Indication [Range]

BAS*1 (bass)

Adjust the bass. [–06 to +06]

TRE*1 (treble)

Adjust the treble. [–06 to +06]

FAD*2 (fader)

Adjust the front and rear speaker balance. [R06 to F06]

BAL (balance)

Adjust the left and right speaker balance. [L06 to R06]

LOUD*1 (loudness)

Boost low and high frequencies to produce a well-balanced sound at low volume level. [LOUD ON or LOUD OFF]

VOL (volume)

Adjust the volume. [00 to 30 or 50*3]

*1 When you adjust the bass, treble, or loudness, the adjustment you have made is stored for the currently selected sound mode (C-EQ) including “USER.”

*2 If you are using a two-speaker system, set the fader level to “00.”

*3 Depending on the amplifier gain control setting. (See page 16 for details.)

General settings — PSM

You can change PSM (Preferred Setting Mode) items listed in the table that follows.

1

2Select a PSM item.

Ex.: When you select “DIMMER”

3Adjust the PSM item selected.

4Repeat steps 2 and 3 to adjust the other PSM items if necessary.

5Finish the procedure.

14