How to read this manual

•Button operations are mainly explained with the illustrations in the table below.

•Some related tips and notes are explained in “More about this unit” (see pages 16 and 17).

Press briefly.

Press repeatedly.

Press either one.

Press and hold until your desired response begins.

Press and hold both buttons at the same time.

The following marks are used to indicate...

: Built-in CD player operations.

: External CD changer operations.

: Indicator displayed for the corresponding operation.

CONTENTS

 

Control panel ...................................

4

Remote controller — RM-RK50 ..............

5

Getting started.................................

6

Basic operations....................................................

6

Radio operations ..............................

7

Disc operations.................................

8

Playing a disc in the unit ......................................

8

Playing discs in the CD changer ............................

8

Sound adjustments...........................

11

General settings — PSM ...................

12

Title assignment ..............................

14

External component operations .............

15

More about this unit .........................

16

Maintenance ....................................

18

Troubleshooting...............................

19

Specifications...................................

21

ENGLISH

Warning:

If you need to operate the unit while driving, be sure to look ahead carefully or you may be involved in a traffic accident.

Caution on volume setting:

Discs produce very little noise compared with other sources. Lower the volume before playing a disc to avoid damaging the speakers by the sudden increase of the output level.

For safety...

•Do not raise the volume level too much, as this will block outside sounds, making driving dangerous.

•Stop the car before performing any complicated operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit.

3