ENGLISH
To change the FM tuner selectivity
—IF Filter
In some areas, adjacent stations may interfere with each other. If this interference occurs, noise may be heard.
•Auto: When this type of interference occurs, this unit automatically increases the tuner selectivity so that interference noise will be reduced. (But the stereo effect will also be lost.)
•Wide: Subject to the interference from adjacent stations, but sound quality will not be degraded and the stereo effect will not be lost.
To turn on/off the key-touch tone—Beep
You can deactivate the
• On: | Activates the |
• Off: | Deactivates the |
To select the external component to use
—Ext Input
You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor
To use the external component as the playback source through this unit, you need to select which
• Changer: | To use the CD changer. |
• Line In: | To use the external component other |
| than CD changer. |
Note:
For connecting the Line Input Adaptor
external component, refer to the Installation/Connection Manual (separate volume).
Changing the display color
You can set the display color using the PSM control. By selecting “Source” as the “Mode” (color mode) setting, you can select your favorite color for each source (or for all sources).
Note:
When selecting “User” as the “Mode” setting, you
can adjust and store your own colors as you like. See page 34.
Setting the desired color for each source—Source
Once you have set the color for each source (or for all sources), the display illuminates in the selected color when the source is selected.
1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.
(See page 30.)
2 Press 5 (up) or ° (down) repeatedly
until “Color” appears as the PSM category on the left side of the display.
3 Select “Mode.”
Currently selected setting for “Mode”
32
