16
ENGLISH

Recalling the sound modes

When “SCM LINK” is set to “SCM LINK
ON,” select the source.
The sound mode stored in memory for the
selected source is recalled.
Notes:
• You can adjust each sound mode to your preference,
and store it in memory.
If you want to adjust and store your original sound
mode, see “Storing your own sound adjustments”
below.
• To adjust the bass and treble reinforcement levels or
to turn on/off the BBEII function temporarily, see
pages 14 and 15. (Your adjustments will be
canceled if another source is selected.)
Storing your own soundadjustments
You can adjust the sound modes (SCM BEAT,
SCM SOFT, SCM POP) to your preference and
store your own adjustments in memory.
• There is a time limit in doing the following
procedure. If the setting is canceled before you
finish, start from step 1 again.
Indication For: Preset values
Bass Treble BBEII
SCM BEAT Rock or disco +02 00 2
music
SCM SOFT Quiet +01 –03 OFF
background
music
SCM POP Light music +04 +01 OFF
SCM OFF (Flat sound) 00 00 2
21
1
Press MODE.
The number buttons can work as
different function buttons.
2
Select the sound mode you want.
For details, see page 15.
3
1Select the item you want to adjust
(BASS or TREBLE).
2Adjust the selected item.
Repeat step 3 to adjust the other items.
To adjust the BBEII level, see page 15.
4
Press MODE.
5
Press and hold SCM until the sound
mode you have selected flashes on
the display.
Your adjustment made for the
selected sound mode is stored in
memory.
6
Repeat the same procedure to
adjust other sound modes.

To reset to the factory settings

Repeat the same procedure and reassign the
preset values listed in the table on the left column.
EN14-16.KD-LX300[J]f 1/5/01, 3:40 PM16