8
ENGLISH
To stop searching before a station is received,
press the same button you have pressed for
searching.
To tune in FM stations only with strong signals
1Press MODE.
“MODE” appears on the display, and the number
buttons can work as different function buttons.
2Press LOCAL, while “MODE” is still on the display,
so that the LOCAL indicator lights up on the
display.
This function works only while searching FM
stations, including SSM preset (see page 9).
Each time you press the button, the LOCAL
indicator lights up and goes off alternately.

Searching a station manually:

Manual search

1
Select the band.
1Press SOURCE to select
tuner as the source.
2If necessary, press BAND
repeatedly to select the
band.
Each time you press the button, the band
changes as follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.

Listening to the radio

You can use either automatic searching or manual
searching to tune into a particular station.

Searching a station automatically:

Auto search

1
Select the band.
1Press SOURCE to select
tuner as the source.
2If necessary, press BAND
repeatedly to select the
band.
Each time you press the button, the band
changes as follows:
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
When a station is received, searching
stops.
Selected band appears.
Press 4 to search
stations of lower frequencies.
RADIO BASIC OPERATIONS
SOURCE
KD-LX300
SSM
BAND
OFF
BBE
MODE
DISP
SEL
10
78
911 12
INT RPT RNDLOCALMONOSCM
FM1 FM2 FM3 AM
FM1 FM2 FM3 AM
Press ¢ to search
stations of higher frequencies.
EN07-10.KD-LX300[J]f 1/5/01, 3:40 PM8