9

ENGLISH
Storing stations in memory
You can use one of the following two methods to
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
station Sequential Memory)
• Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band
(FM1, FM2 and FM3).
1

Select the FM band (FM1–3) you want

to store FM stations into.

1Press SOURCE to select
tuner as the source.
2If necessary, press
BAND repeatedly to
select the band.
Each time you press the button, the band
changes as follows:
2

Press and hold both buttons for more

than 2 seconds.

Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2 or FM3).
These stations are preset in the number buttons
— No.1 (lowest frequency) to No.6 (highest
frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
“SSM” appears, then disappears when automatic
preset is over.
2

Press and hold ¢ or 4 until

“M” (manual) starts flashing on the

display.

3

Tune into a station you want while “M”

is flashing.

• If you release your finger from the button,
the manual mode will automatically turn off
after 5 seconds.
• If you hold down the button, the frequency
keeps changing until you release the button.
When an FM stereo broadcast is hard to
receive:
1Press MODE while listening to an FM stereo
broadcast (the ST indicator lights up while
receiving an FM stereo broadcast).
2Press MONO, while “MODE” is still on the display,
so that the MO indicator lights up on the display.
The sound you hear becomes monaural but the
reception will be improved (the ST indicator goes
off).
Each time you press the button, the MO indicator
lights up and goes off alternately.
Press 4 to tune into
stations of lower frequencies.
Press ¢ to tune into
stations of higher frequencies.
FM1 FM2 FM3 AM
EN07-10.KD-LX100[J]f 1/8/01, 10:24 AM9