7
ENGLISH
BASIC OPERATIONS
1

Turn on the power.

The display illuminates and
the control panel and control
dial come out.
2

Select the source.

Each time you press the
button, the source changes
as follows:
= Tuner (FM or AM) = CD*
= CD changer** = External component
= (back to the beginning)
*If a CD is not in the loading slot, you cannot
select CD as the source to play.
** Without connecting the CD changer, you cannot
select it as the source to play.
To operate the tuner (FM or AM),
see pages 8 – 10.
To operate the CD player,
see pages 11 – 13.
To operate the CD changer,
see pages 25 – 27.
To operate the external component connected
to the LINE IN plugs, see page 28.
3
Adjust the volume.
4

Adjust the sound as you want (see

page 14).

To drop the volume in a moment

Press SOURCE for more than 1 second while
listening to any source. “ATT” starts flashing on the
display, and the volume level will drop in a moment.
To resume the previous volume level, press the
button for more than 1 second again.

To turn off the power

Press and hold OFF/0 until “SEE YOU” appears
on the display.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 17.
To increase the volume.
To decrease the volume.
Volume level meter
Note on display illustrations:
Illustrations will differ from what appears if
“CLOCK DISP” is set to “CLK DISP OFF.” See
page 19.
KD-LX300
SSM
BAND
OFF
BBE
MODE
DISP
SEL 10
78
911 12
INT RPT RNDLOCALMONOSCM
SOURCE
KD-LX300
BAND
OFF
BBE
123
SOURCE
EN07-10.KD-LX300[J]f 1/5/01, 3:40 PM7