19
ENGLISH
To cancel Advanced SCM — SCM LINK
You can cancel the Advanced SCM (Sound
Control Memory), and unlink the sound modes
and the playback sources
When shipped from the factory, a different sound
mode can be stored in memory for each source
so that you can change the sound modes simply
by changing the sources.
• SCM LINK ON: Advanced SCM (different
sound modes for different
sources)
• SCM LINK OFF: Conventional SCM (one
sound mode for all sources)
To set the clock display — CLOCK DISP
You can set the clock to be shown on the lower
part of the display when the unit is turned on.
When shipped from the factory, the clock is set to
be shown on the display.
• CLK DISP ON: Clock display is turned on.
• CLK DISP OFF: Clock display is turned off.
When “CLK DISP OFF” is
selected, the current sound
mode setting (see page 15) is
shown on the upper part of
the display*.
*If an external source is selected, the current sound
mode setting is shown on the lower part of the
display.
To select the level meter — LEVEL METER
You can select the level meter display according
to your preference. When shipped from the
factory, “NORMAL” is selected.
• NORMAL: Normal audio level meter
(illuminates from bottom to
top).
• MIRROR: Level meter illuminates as if it
were reflected on a mirror.
• LEVEL OFF: Volume level meter stays lit
and does not change its
illumination.
• ALL OFF: Level meter turns off.
To select the dimmer mode
— DIMMER MODE
When you turn on the car headlights, the display
automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer
mode is activated.
• DIMMER AUTO:Activates Auto Dimmer.
• DIMMER OFF: Cancels Auto Dimmer.
• DIMMER ON: Always dims the display.

Note on Auto Dimmer:

Auto Dimmer equipped with this unit may not work
correctly on some vehicles, particularly on those
having a control dial for dimming.
In this case, set the dimmer mode to “DIMMER ON”
or “DIMMER OFF.”
To turn on/off the key-touch tone
— BEEP SWITCH
You can deactivate the key-touch tone if you do
not want it to beep each time you press a button.
When shipped from the factory, the key-touch
tone is activated.
• BEEP ON: Activates the key-touch tone.
• BEEP OFF: Deactivates the key-touch
tone.
To adjust the display contrast level
— CONTRAST
You can adjust the display contrast level among
“01” (dark) to “10” (bright). When shipped from
the factory, the display contrast level is set at
level “05.”
EN17-24.KD-LX300[J]f 1/5/01, 3:39 PM19