JVC KD-S790 Radio Operations, Listening to the radio, Searching a station manually Manual search

RADIO OPERATIONS

ENGLISH

Listening to the radio

You can use either automatic searching or manual

searching to tune in to a particular station.

Searching a station automatically: Auto search

1 Select the band (FM 1 – 3, AM).

Each time you press the

button, the band changes as follows:

FM1 FM2 FM3 AM

Selected band appears.

Lights up when receiving an FM stereo broadcast with sufficient signal strength.

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

To stop searching before a station is received,

press the same button you have pressed for searching.

Searching a station manually: Manual search

1 Select the band (FM 1 – 3, AM).

Each time you press the

button, the band changes as

follows:

FM1 FM2 FM3 AM

Note:

This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.

2 Press and hold ¢ or 4 until “M” (manual) starts flashing on the display.

2 Start searching a station.

To search stations of higher frequencies

To search stations of lower frequencies

When a station is received, searching stops.

10