JVC KD-SH99R service manual 1-22

KD-SH99R

			UPD784215AGC146(1/2)
Pin No.	Symbol	I/O	Function
1	PREQ	O	Mechanism power supply ON/OFFdemand output("L":On demand)
2	AMUTE	O	Audio output MUTE control signal output ("L" :MUTE ON)
3		O	Non connected
4		O	Non connected
5		O	Non connected
6		O	Non connected
7	DIMMER-OUT	O	Unused output port
8	ANT PEM	O	Antenna remote output
9	VDD	-	5V connection
10	X2		Sub-clock 32.738MHz
11	X1	I	Sub-clock 32.738MHz
12	VSS	-	GND connection
13	XT2		Sub-clock 12.5MHz
14	XT1	I	Sub-clock 12.5MHz
15	RESET		Reset detection terminal
16		I	Non connected
17	BUS-INT	O	J-BUS signal interrupt input
18	PS2	I	POWER SAVE2 BACK UP synchronization. It is H input and stop mode.
19		I	Unused input port
20	RDS-SCK	I	RDS clock input
21	RDS-DA	I	RDS data input
22	REMOCON	I	Remote control signal input
23	AVDD	-	5V connction
24	AVREF0	-	5V connection
25	SD-ST	I	Station detector, stereo signal input.
			It is H and broadcasting station havingBroadcasting station,L:stereo
26	MRC DATA	I	MRC DATA input
27	KEY0	I	Key input 0
28	KEY1	I	Key input1
29	TEMP	I	Temperature data input for contrast correction
30	LEVEL	I	Level meter input
31	SQ	I	S.QUALITY level input
32	S.METER	I	S.METER level input
33	AVSS	-	GND connection
34	INLOCK	O	The LOCK detection output. At LOCK:H
35	NC	O	Unused output port
36	AVREF	-	5V connection
37	BUS-SI	I	J-BUS data input
38	BUS-SO	O	J-BUS data output
39	BUS-SCK	I/O	J-BUS clock I/O
40	(STAGE)	I	H:L:Initialization port
41	LCD-DA	O	Data output to LCD driver
42	LCD-CL	O	Clock output to LCD driver
43	LCD-CE	O	Chipenable output to LCD driver
44	BUZZER	O	Buzzer output
45	EPDAI	I	Communication data input of 12C
46	EPDAD	O	Communication data input of 12C
47	EPCLK	O	Communication data input of 12C
48	BUS-I/O	O	The J-BUS I/O switch output. When outputting :H,When inputting :L
49	PM0	O	Panel close side motor control signal output
50	PM1	O	Panel opening side motor control signal output

1-22