JVC KD-SX9350 External Component Operations, Playing an external component, English, Cd Line In

EXTERNAL COMPONENT OPERATIONS

ENGLISH

* Not compatible with	Portable MP3 player, etc.
digital signals.

Auxiliary input (MP3 INPUT)*

Playing an external component

You can connect two external components to this unit.

Connect one to the CD changer jack on the rear using the Line Input Adapter KS-U57 (not supplied), and the other to the MP3 INPUT jack on the control panel.

Preparations:

•For connecting the Line Input Adapter KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

•Before operating the external component using the following procedure, select the external input correctly. See “To select the external component to use—EXT IN” on page 28.

•If the input level of the external component connected to the AUX jack is not high enough, increase the input level properly. (See “To adjust the auxiliary input level—AUX ADJ” on page 28.)

1 Select the external component (LINE IN or AUX IN).

To select “LINE IN” (component connected to the CD changer jack on the

rear), press CD (CD-CH) repeatedly.

CD LINE IN*

• If “LINE IN”* does not appear on the display, see page 28 and select the external input (“LINE IN”).

*Displayed only when one of the following sources is selected—FM, AM, and CD.

To select “AUX IN” (component connected to the MP3 INPUT jack on the control panel), press and hold CD (CD-CH).

Note on One-Touch Operation:

When you press CD (CD-CH), the power automatically comes on. You do not have to press to turn on the power.

2 Turn on the connected component and start playing the source.

3 Adjust the volume.

4 Adjust the sound characteristics you want. (See pages 23 and 24.)

36